Resin Casting Defects

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Resin Casting Defects

Resin casting defects can be caused by various factors. Among the most common ones are:

• Air bubbles: they can form during mixing or due to excessive pouring pressure.
• Incomplete filling: it can occur when the resin does not evenly distribute in the mold.
• Shrinkage: the resin can shrink and create cracks or deformations during the curing process.
• Contamination: presence of impurities or moisture that compromise the casting quality.
• Incorrect temperature: wrong temperature during casting can lead to curing and finishing issues. It is crucial to carefully follow the manufacturer's instructions and use the correct techniques to avoid these defects in resin casting.

How to Correct Epoxy Resin Pour

To correct an epoxy resin pour, it is necessary to follow some essential steps:

1. Assess the issue: identify the damaged or irregular part.
2. Prepare the area: thoroughly clean the surface to be corrected to ensure optimal adhesion of the new resin.
3. Prepare the resin: carefully follow the manufacturer's instructions to mix and dose the resin and hardener correctly.
4. Pouring and leveling: pour the resin onto the damaged area and level it carefully to achieve a uniform surface.
5. Drying and curing: allow the resin to dry for the necessary time for complete curing.
6. Any finishing touches: if needed, perform any finishing touches or sanding to achieve a perfect final result. By following these steps accurately, it is possible to successfully correct an epoxy resin pour.

Improving DIY resin finish

To enhance the finish of your DIY resin project, it's crucial to follow some precautions. First and foremost, make sure to thoroughly prepare the surface where the resin will be applied by removing dust and dirt. Use a specific resin primer to ensure better adhesion and more consistent results. When applying the resin, work in a well-ventilated area to prevent the formation of air bubbles. For a glossier and smoother finish, you can sand between coats with fine-grit sandpaper. Lastly, protect the surface from dust during the drying process to avoid imperfections. By following these guidelines, you will achieve a flawless finish on your DIY resin project.

Resolving Epoxy Resin Issues

Resolving issues related to epoxy resin may require attention and precision. Here are some useful tips:

• Make sure to correctly follow the mixing instructions to avoid air bubbles or incompatibility issues.
• To eliminate air bubbles, use a degassing chamber or pass a hot air flame over the surface.
• If the resin does not cure properly, it may be necessary to check the temperature and humidity of the working environment.
• In case of adhesion problems, ensure that the surfaces are clean and properly prepared before application.
• If needed, you can sand and polish the resin to correct surface imperfections. By carefully following these guidelines, you can successfully address epoxy resin issues.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85