Aesthetic defects in resin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Aesthetic defects in resin

Aesthetic defects in resin can be caused by various factors, including:

1. Air bubbles: they can form during the mixing or application process of the resin, creating small visible bubbles on the surface.
2. Inclusion of dust or dirt: if the resin is not mixed in a clean environment, inclusion of dust or dirt may occur, compromising the final appearance.
3. Discoloration: exposure to ultraviolet light or use of unstable pigments can cause unwanted color changes.
4. Scratches or surface imperfections: during the curing phase, the resin is vulnerable to mechanical damage that can compromise its final appearance. To avoid these defects, it is essential to carefully follow the resin mixing and application instructions and work in a clean and controlled environment.

How to Correct Air Bubbles in Epoxy Resin

Air bubbles in epoxy resin can be corrected by following some steps. Here's what you can do:

• Use a brush to remove larger bubbles on the surface of the resin.
• Use a gas torch or a deaerator to eliminate smaller bubbles.
• Mix the resin slowly to reduce bubble formation during the mixing process.
• Use a resin with low viscosity to reduce the likelihood of bubble formation.
• Let the resin rest for a few minutes after mixing to allow the bubbles to rise to the surface and then remove them. By following these tips, you can effectively correct air bubbles in the resin.

Removing streaks in epoxy resin

To remove streaks in epoxy resin, it is important to follow some steps. First of all, make sure that the resin surface is clean and free of dust. Then, you can use fine-grit sandpaper to gently sand the streaks, being careful not to damage the surrounding resin. After sanding, it is advisable to polish the surface with a specific compound for resins, applied with a soft cloth. Finally, for optimal results, you may consider using a clear resin coating, which will provide shine and uniformity to the treated surface.

Resolving opacity in epoxy resin

To solve opacity issues in epoxy resin, it is important to follow some key steps:

1. Correct mixing: Make sure to thoroughly mix the resin and hardener following the proportions recommended by the manufacturer.
2. Removing air bubbles: Use a torch to eliminate any air bubbles present in the resin before it hardens.
3. Tool cleaning: Ensure that the containers and tools used for mixing are clean to prevent any contamination.
4. Use high-quality resins: Always choose high-quality transparent resins to avoid unwanted opacity. By carefully following these tips, it will be possible to achieve transparent and opacity-free results in resin processing.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85