Imperfect thin pour in naturesin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

imperfect thin pour in naturesin

The imperfect thin pour is a common defect in epoxy resin or silicone applications. This issue occurs when the liquid material does not spread evenly on the surface, leaving uncovered or excessively thin areas. The causes can vary, such as inadequate viscosity of the mixture, uneven application, or insufficient surface preparation. To avoid imperfect thin pours, it is crucial to carefully follow the manufacturer's instructions, ensure the surface is clean and properly prepared, and use suitable tools to ensure an even distribution of the material.

How to Achieve Perfect Thin Castings

To achieve perfect thin castings, it is important to follow some fundamental steps:

1. Prepare the epoxy resin or silicone according to the manufacturer's instructions.
2. Ensure you have a well-ventilated environment and a flat, clean surface to work on.
3. Pour the epoxy resin or silicone slowly into a mold, avoiding air bubbles and sudden movements.
4. To prevent excessive run-offs, slightly tilt the mold during the pouring phase.
5. Level the surface carefully and let it dry completely following the recommended curing times.
6. If necessary, you can use a deaerator to remove any air bubbles. By following these instructions, you can achieve perfect thin castings for your DIY projects.

Techniques to improve thin castings

To enhance thin castings, it is important to follow some specific techniques. Here are some helpful tips:

• Use suitable resins for thin castings, such as transparent epoxy resins, which allow maintaining the material's transparency and brilliance.
• Precisely measure the resin components to avoid errors in catalysis and ensure correct polymerization.
• Thoroughly mix the resin to prevent the formation of air bubbles, which can compromise the final appearance of the casting.
• Use molds specifically designed for thin castings, featuring smooth surfaces that allow easy removal of the artifact.
• Consider the use of release agents or liquid silicone to facilitate the extraction of the artifact from the mold without damaging it.

Tips to Avoid Imperfections in Castings

To avoid imperfections in castings, follow these useful tips:

• Make sure to thoroughly prepare and clean the surface before pouring the epoxy resin or silicone.
• Use high-quality resins or silicones suitable for the type of project you are working on.
• Measure the proportions between resin and hardener accurately to avoid polymerization issues.
• Mix the components well to ensure even distribution and prevent air bubbles.
• Pour the resin or silicone slowly and carefully to avoid drips or build-ups.
• Allow the material to settle and cure in a dust-free environment free from drafts.
• Follow the manufacturer's instructions carefully and, if necessary, practice on small samples before proceeding with the main project.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85