Naturesin with bubbles in artistic casting

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Naturesin with bubbles in artistic casting

Naturesin resins with bubbles in artistic casting are special transparent epoxy resins used to create unique decorative effects. These resins contain micro air bubbles that, during the casting and curing phase, are randomly distributed within the material, creating an effect similar to naturally forming bubbles. This type of resin is highly appreciated in the artistic and DIY sector for its ability to give artworks an organic and lively appearance. Naturesin resins with bubbles in artistic casting are ideal for creating tables, countertops, and other creative artifacts.

Transparent resin air bubbles tutorial

Air bubbles in transparent resin can compromise the final result of a DIY project. To avoid this issue, carefully follow these steps:

1. Prepare the material and the work area in a clean environment free from air drafts.
2. Use high-quality transparent resin, carefully mixing component A and B according to the manufacturer's instructions.
3. Slowly pour the resin into the mold, avoiding sudden movements that could introduce air bubbles.
4. Use a stick to gently remove any existing air bubbles, or use a gas torch to heat the surface and make them emerge.
5. Cover the project with a lid to protect it from dust and let it settle for the recommended time. By following these steps, you will achieve bubble-free results in your transparent resin creation.

Creating handmade resin bubble jewelry

The creation of handmade jewelry with resin that features bubbles can be due to various factors. Air bubbles can form during the resin mixing process and become trapped inside the material during the curing phase. To prevent the formation of unwanted bubbles in resin jewelry, it is advisable to follow some practices:

• Mix the resin slowly to avoid air introduction
• Use a wooden stick for mixing instead of a blender
• Remove bubbles with a torch or brush before the resin hardens
• Let the resin rest for a few minutes after mixing to allow bubbles to rise to the surface
• Use a specific jewelry resin that reduces bubble formation By following these precautions, it is possible to create resin jewelry without unwanted air bubbles.

Techniques to prevent bubbles in artistic resin

To prevent the formation of bubbles in artistic resin, it is essential to follow some specific techniques. Here are some helpful tips:

• Make sure to work in a well-ventilated environment with a constant temperature.
• Mix the resin slowly to avoid air ingress.
• Use a gas torch to eliminate surface bubbles.
• Preheat the resin and the surfaces where it will be poured.
• Avoid shaking the resin too vigorously to prevent air entrapment.
• Use a clean and moisture-free mixing container.
• Apply a thin layer of resin and wait for it to level before adding more. By following these techniques, you can achieve impeccable results in your resin art pieces.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85