Epoxy resin with bubbles in shallow molds

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy resin with bubbles in shallow molds

Air bubbles forming in the epoxy resin during casting in shallow molds can be caused by several factors. To avoid this issue, it is important to take some precautions:

1. Ensure that the resin is thoroughly mixed to prevent trapped air bubbles.
2. Use a tool to remove bubbles, such as an airbrush or a vacuum agitator.
3. Pour the resin slowly and evenly into the mold to reduce bubble formation.
4. Use specific low-viscosity resins for shallow molds to facilitate bubble release. By following these guidelines, it is possible to achieve better results and minimize the presence of air bubbles in the epoxy resin in shallow molds.

How to Eliminate Bubbles in Deep Mold Resin Casting

To eliminate bubbles from the resin in deep molds, it is important to follow some precise steps:

1. Use a specific resin for deep molds that reduces bubble formation.
2. Before pouring the resin into the mold, it is advisable to use a brush to eliminate any air bubbles on the surface of the mold.
3. Use a deaerator or a heat gun to eliminate air bubbles present in the resin itself.
4. Leave the resin in the mixing container for a few minutes before pouring it into the mold, to allow air bubbles to rise to the surface and disappear.
5. If necessary, you can use a syringe to inject the resin directly into the deeper areas of the mold, thus reducing the formation of bubbles. By carefully following these steps, it will be possible to achieve optimal results in working with resin in deep molds.

Tips for bubble-free resin in small molds

To prevent bubble formation in resin when casting in small molds, follow these tips:

• Make sure to thoroughly mix the resin following the manufacturer's instructions.
• Use a tool to remove air bubbles, such as a hot air brush or a gas torch.
• Fill the mold gradually and slowly to allow bubbles to escape.
• If necessary, use a resin with low viscosity to facilitate bubble release.
• Gently tap the mold to bring larger bubbles to the surface.
• Cover the mold with a lid to prevent dust or foreign bodies from causing bubble formation.

Techniques to avoid resin bubbles in mini molds

To avoid bubbles in the resin when working with mini molds, it is important to follow some specific techniques:

• Ensure that the mold is completely clean and dry before pouring the resin.
• Use a resin suitable for mini molds, with low viscosity and extended working time.
• Mix the resin slowly to avoid air incorporation.
• Use a degasser to remove any air bubbles present in the resin.
• Pour the resin slowly and carefully into the mold to minimize bubble formation.
• Use a heat gun to eliminate any surface bubbles after pouring. By following these techniques, it will be possible to achieve bubble-free results in the resin when working with mini molds.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85