Epoxy Resin with Bubbles in Mini Molds

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy Resin with Bubbles in Mini Molds

Air bubbles can be a common issue when working with resin in mini molds. To prevent bubble formation in the resin, it is important to follow some precautions:

1. Make sure to thoroughly mix the resin, avoiding the incorporation of air during the process.
2. Use a tool such as a brush or a toothpick to remove air bubbles in the resin poured into the mold.
3. If bubbles persist, you can try using a heat gun to gently warm the surface of the resin and bring the bubbles to the surface in a controlled manner.
4. Work in a consistently warm environment and avoid drafts that could contribute to bubble formation. By carefully following these guidelines, you can achieve better results when working with resin in your mini molds.

How to Remove Bubbles from Epoxy Resin

To remove bubbles from epoxy resin, it is important to follow some steps. Initially, make sure to thoroughly mix the resin and hardener to prevent the formation of air bubbles during the preparation process. Then, slowly and evenly pour the resin into a mold. To eliminate any existing bubbles, you can use a gas torch to heat the surface of the resin, being careful not to burn it. Alternatively, you can use a hot brush to remove surface bubbles. Wait for the resin to completely solidify before touching it.

Techniques to Avoid Bubbles in Epoxy Molds

To avoid bubbles in epoxy molds, it is essential to follow specific techniques. Here are some useful tips:

• Ensure you work in a clean environment with a constant temperature.
• Thoroughly mix the epoxy and the hardener following the manufacturer's instructions.
• Use a flux to eliminate air bubbles from the epoxy before pouring it into the molds.
• Use a heat gun to remove any surface bubbles after pouring the epoxy into the molds.
• If necessary, invest in a vacuum chamber to effectively remove air bubbles from the epoxy. By following these precautions, it will be possible to obtain bubble-free epoxy molds and achieve a high-quality final result.

Tips for achieving perfect miniature prints

To achieve perfect miniature prints, follow these tips:

• Use high-quality resins specifically designed for 3D printing miniatures.
• Ensure that your 3D printer is properly calibrated for precise details.
• Choose a suitable molding silicone for small dimensions to avoid detail issues.
• Apply a transparent protective coating to enhance the durability and finish of the prints.
• Pay attention to the temperature and humidity of the printing environment.
• Experiment with different printing settings to find the optimal one for your needs.
• Regularly clean the printer and replace consumable components when necessary.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85