Uneven surface after resin casting

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Uneven surface after resin casting

After a resin casting, the surface may not be smooth mainly due to two factors. Firstly, there may be trapped air bubbles during the casting process, which can cause irregularities on the surface. Secondly, an improper leveling of the resin during the casting itself could be a possible cause. To solve the issue and achieve a smooth surface, it is advisable to use a heat gun to remove air bubbles and ensure proper leveling of the resin during casting. Additionally, it is important to work in a clean and well-ventilated environment to avoid the presence of dust or other contaminants on the resin surface.

How to polish resin after casting

After pouring resin, it is essential to polish the surface to achieve a smooth and uniform result. To polish resin, it is advisable to follow these steps:

1. Start with coarse-grit sandpaper to remove any irregularities and level the surface.
2. Gradually move to medium-grit sandpaper and then to fine-grit to eliminate marks left by the coarse grit.
3. Use a specific polishing compound for resins or silicones to achieve a shiny and transparent finish.
4. Finally, thoroughly clean the polished surface to remove any residue and dust. By following these simple steps, you can effectively polish resin after casting and achieve a professional result.

Troubleshooting Epoxy Resin Finishing Issues

Resolving finishing issues with epoxy resin can depend on various factors. Some useful tips for addressing this situation include:

• Ensure to properly follow the manufacturer's instructions during the application of epoxy resin.
• Verify that the surface on which the resin is applied is clean, dry, and free from dust or grease.
• Use clean tools and equipment to avoid resin contamination during application.
• Consider using a primer compatible with epoxy resin to enhance adhesion and final finish.
• If air bubbles or surface irregularities occur, a deaerator can be used to eliminate them.
• Lastly, for a perfect finish, it is advisable to sand and polish the surface after the resin has completely cured.

Techniques to achieve a smooth surface with epoxy resin

To achieve a smooth surface with epoxy resin, it is essential to follow some specific techniques:

• Surface preparation: make sure the surface is clean, dry, and free of dust or grease.
• Accurate mixing: blend the resin with the hardener following the proportions recommended by the manufacturer.
• Uniform application: spread the resin evenly on the surface with a brush or a spatula.
• Removing air bubbles: use a gas torch to eliminate air bubbles trapped in the resin.
• Leveling: ensure the resin is well leveled on the surface to avoid irregularities.
• Finishing: once dry, sand the surface with fine-grit sandpaper to achieve a smooth and uniform finish.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85