Practical solution for air bubbles in epoxy resin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Practical solution for air bubbles in epoxy resin

Air trapped in the resin during the pouring process can compromise the quality of the finished product. To address this issue practically, it is advisable to follow these steps:

1. Use a low-viscosity resin that promotes air release.
2. Use a degreasing agent to remove any oil or dust residues that could trap air.
3. Use a compressed air gun to remove larger air bubbles in the liquid resin.
4. Use a vacuum chamber to effectively remove air from the resin before pouring.
5. Keep the resin and molds at a constant temperature to prevent air bubble formation due to temperature variations. By carefully following these practices, it is possible to obtain bubble-free resin products with a high-quality finish.

How to Remove Air Bubbles from Epoxy Resin

To remove air bubbles from epoxy resin, you can follow these steps:

1. Mix the resin slowly to prevent air from entering.
2. Use a torch to heat the surface of the resin and bring the bubbles to the surface.
3. Use a fine-point tool to pop bubbles near the surface.
4. Use a vacuum cleaner or a syringe to remove smaller bubbles.
5. Gently tap the resin container to bring larger bubbles to the surface.
6. Let the resin rest for a while so that air bubbles rise to the surface and can be removed. By carefully following these steps, you can effectively eliminate air bubbles from the resin.

Techniques to Avoid Air Bubbles in Epoxy Resin

To prevent the formation of air bubbles in epoxy resin, it is essential to follow specific techniques. Here are some useful tips:

• Make sure the resin and hardeners are at the same room temperature.
• Gently mix the resin to avoid air incorporation.
• Use a tall and narrow container for mixing to minimize air agitation.
• Use a gas torch to remove larger bubbles.
• Let the resin sit for a few minutes before use to allow air bubbles to rise to the surface and disappear.
• Use a vacuum chamber to completely eliminate air bubbles from the resin. By following these techniques, it will be possible to achieve bubble-free epoxy resin works.

How to achieve a smooth surface in epoxy resin

To achieve a smooth surface in epoxy resin, it is essential to carefully follow some steps. Here's what to do:

• Make sure to work in a clean and well-ventilated environment to avoid dust and debris on the resin.
• Thoroughly mix the resin and hardener according to the manufacturer's instructions to avoid air bubbles.
• Use a brush or a spatula to evenly spread the resin on the surface.
• If air bubbles appear, you can eliminate them with a gas torch or an ultrasonic device.
• Cover the resin with a lid or a dome to protect it from dust while it dries.
• Finally, gently sand the surface with fine sandpaper to achieve a smooth and uniform finish.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85