**Technique for Flawless Thin Pourings**

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

**Technique for Flawless Thin Pourings**

To achieve flawless thin pourings, it is essential to follow a precise application technique. Here are some useful tips to achieve optimal results:

• Ensure that the surface is clean, dry, and free from impurities.
• Use high-quality epoxy resins to ensure greater adhesion and resistance.
• Thoroughly mix the resin with the catalyst following the recommended proportions.
• Apply the resin in thin and uniform layers, avoiding build-ups and air bubbles.
• Use a brush or spatula to spread the resin evenly.
• Allow each layer to dry and harden completely before proceeding with the next one.
• Protect the artwork from dust and external agents during the drying process. By carefully following these steps, you will be able to create impeccable thin pourings without defects.

Tips for precise resin casting

To achieve precise resin castings, it is essential to follow some practical tips:

• Use high-quality epoxy or polyurethane resins to ensure greater precision and strength.
• Measure the quantities of resin and hardeners accurately, following the recommended proportions by the manufacturer.
• Thoroughly mix the components for at least 2-3 minutes, avoiding the formation of air bubbles.
• Use high-quality silicone molds to obtain precise details and a smooth surface.
• Allow the resin to cure in a dust-free and dry environment, following the recommended drying times. By following these tips, you can achieve precise resin castings for your DIY projects with professional results.

How to achieve perfect resin castings

To achieve perfect resin castings, follow these steps carefully:

1. Prepare the workspace: make sure to have a flat and clean surface.
2. Measure the amount of resin and hardener accurately according to the manufacturer's instructions.
3. Gently mix to avoid air bubbles, preferably with a wooden stick.
4. Pour the resin slowly into your mold or surface, avoiding splashes.
5. If necessary, use a torch to remove any air bubbles.
6. Cover the resin with a lid to protect it from dust and let it dry for the recommended time.
7. Once hardened, carefully remove your creation from the mold. By following these instructions, you will achieve perfect resin castings.

Tips to Avoid Bubbles in Epoxy Resin Castings

To prevent bubbles in epoxy resin castings, follow these helpful tips:

• Make sure to work in a clean and well-ventilated environment.
• Preheat the resin and hardener to reduce bubble formation.
• Gently mix the two components to avoid air entrapment.
• Use a torch to remove surface bubbles after pouring.
• Avoid over-agitating the resin during mixing.
• Use a vacuum chamber to eliminate bubbles suspended in the resin.
• Apply a thin layer of resin as a seal coat to the surface to reduce bubble formation.
• Allow the resin to settle for a few minutes before proceeding with the final casting.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85