Facilitating the Control of Resin Casting

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Facilitating the Control of Resin Casting

To facilitate the control of resin casting, it is advisable to use special silicones as barriers to prevent leaks. Additionally, it is important to prepare the surface where the resin will be poured carefully, removing any residues and leveling the base. During the casting process, it is useful to use specific tools such as spatulas or pallets to evenly distribute the resin. Lastly, to avoid air bubbles, it is recommended to use a degreasing agent and subject the compound to a degassing process. By carefully following these procedures, it will be possible to achieve a controlled resin casting without defects.

Improving the durability of epoxy resin

To enhance the durability of epoxy resin, it is crucial to follow some best practices during the processing and application. Here are some useful tips:

• Ensure proper preparation of the surface where the resin will be applied by removing dirt, grease, and other impurities that could affect adhesion.
• Use high-quality resins suitable for the specific project requirements, avoiding low-cost solutions that may deteriorate more easily over time.
• Apply a primer layer compatible with the chosen resin to ensure better adhesion and long-term durability.
• Carefully follow the manufacturer's instructions during application and curing to avoid errors that could compromise the resin's strength over time. By following these guidelines, it will be possible to significantly improve the durability of the resin and achieve longer-lasting and higher-quality results.

**Techniques to Avoid Bubbles in Epoxy Resin**

To prevent the formation of bubbles in epoxy resin, it is important to follow some specific techniques:

1. Mix Slowly: Avoid incorporating air by stirring the resin slowly and carefully.
2. Use a Vacuum Chamber: A vacuum chamber can help eliminate air bubbles before the curing process.
3. Warm the Resin: Slightly heating the resin can reduce viscosity and promote bubble release.
4. Let it Rest: After mixing the resin, let it rest for a few minutes to allow bubbles to rise to the surface and then remove them. By following these techniques, it is possible to achieve more uniform results without bubbles in resin processing.

How to achieve glossy surfaces with epoxy resin

To obtain glossy surfaces with epoxy resin, it is essential to follow some key steps:

1. Preparation: Make sure the surface to be treated is clean, dry, and free from dust or grease.
2. Application: Pour the resin onto it in a uniform and thin layer.
3. Leveling: Use a brush or a spatula to spread the resin evenly.
4. Elimination of air bubbles: To prevent the formation of air bubbles, you can use a gas torch to heat the surface or a fine bristle brush to remove them.
5. Polymerization: Let the resin dry and polymerize following the manufacturer's instructions. By carefully following these steps, you can achieve glossy and perfectly finished surfaces with epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85