Facilitating the natural leveling of epoxy resin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Facilitating the natural leveling of epoxy resin

To facilitate the natural leveling of epoxy resin, it is advisable to follow some simple steps. First of all, make sure to prepare the surface on which the resin will be poured carefully, eliminating any imperfections and leveling the base. Use a specific primer for resins to ensure optimal adhesion. During the pouring phase, make sure to evenly distribute the resin on the surface and avoid the formation of air bubbles. Finally, let the resin dry in a dust-free and dry environment to promote natural and uniform leveling.

How to Achieve a Smooth Surface with Epoxy Resin

To achieve a smooth surface with epoxy resin, follow these steps:

1. Prepare the surface: make sure it is clean, dry, and free from dust and grease.
2. Mix the resin and hardener according to the manufacturer's instructions.
3. Apply a thin layer of resin to the surface using a brush or a spatula.
4. Level the resin with a notched trowel to avoid air bubbles.
5. Allow the resin to dry and cure completely.
6. If necessary, lightly sand the surface to eliminate any irregularities.
7. Apply a second coat of resin for an even smoother finish.
8. Finally, seal the surface with a clear coating to protect it and make it even more glossy.

Tips for a perfect resin leveling

To achieve a perfect leveling of the resin, follow these useful tips:

• Ensure that the working surface is clean and free from dust or dirt that could compromise the adhesion of the resin.
• Use a specific primer for resins to ensure better adhesion to the substrate.
• Thoroughly mix the resin following the manufacturer's instructions to avoid clumps or air bubbles.
• Apply the resin in thin and uniform layers, using a suitable brush or spatula.
• Use a resin leveler to evenly distribute the material and eliminate any irregularities.
• Let the resin dry in a draft-free environment and following the recommended curing times. By following these tips, you will achieve a perfect resin leveling without any issues.

Tips for leveling epoxy resin evenly

To achieve a smooth surface with epoxy resin, follow these tips:

• Prepare the working surface carefully, ensuring it is clean and leveled.
• Pour the resin evenly onto the surface, avoiding build-ups and irregularities.
• Use a brush or a spatula to spread the resin uniformly across the entire surface.
• To level the resin, you can use a brush roller or a notched trowel to eliminate any air bubbles and distribute the material evenly.
• Allow the resin to dry following the manufacturer's instructions to prevent deformations or imperfections.
• Periodically check the leveling during the drying process to correct any unevenness.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85