Facilitating the leveling of fluid NatureResin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Facilitating the leveling of fluid NatureResin

To facilitate the leveling of fluid NatureResin, it is advisable to follow these steps:

1. Ensure that the surface is clean, dry, and free of dust.
2. Thoroughly mix the resin and hardener according to the recommended ratios.
3. Pour the mixture evenly onto the surface to be coated.
4. Use a brush or spatula to distribute the resin evenly.
5. Eliminate any air bubbles with a gas torch or a warm brush.
6. Cover with a lid to prevent dust during curing.
7. Wait for the recommended drying time before touching the surface. By carefully following these instructions, an optimal result will be achieved with fluid NatureResin.

How to Speed Up Epoxy Resin Curing

To speed up the curing of epoxy resin, you can follow some practical tips:

1. Use epoxy resins with fast-acting catalysts.
2. Increase the temperature of the environment where the curing takes place, as heat accelerates the process.
3. Thoroughly mix the epoxy resin and the catalyst to promote a uniform blending.
4. Apply thin layers of resin to allow for greater exposure to air and therefore faster curing.
5. Use UV lamps or specific epoxy ovens to further accelerate the curing process. By following these suggestions, you can achieve faster curing times for epoxy resin.

**Techniques to Avoid Bubbles in Epoxy Resin**

To prevent the formation of bubbles in epoxy resin, it is essential to follow specific techniques during the preparation and application of the material. Here are some useful tips:

• Make sure to thoroughly mix the resin and the hardener following the recommended proportions.
• Avoid stirring the resin too vigorously to prevent introducing air.
• Let the mixture rest for a few minutes before application to allow air bubbles to rise to the surface.
• Use a gas torch or a brush to eliminate larger bubbles from the surface of the resin.
• Apply the resin in thin layers to avoid excessive build-ups that could trap air bubbles. By following these techniques, it will be possible to achieve bubble-free epoxy resin finishes.

Ways to color epoxy resin

There are several techniques to color epoxy resin that allow achieving personalized and creative results. Here are some common ways to color epoxy resin:

• Add specific epoxy resin dyes, available in a wide range of colors and shades.
• Mix powder or liquid pigments directly into the resin to obtain customized and intense colors.
• Use metallic or pearlescent pigments to create luminous and special reflections.
• Incorporate alcohol inks for a translucent and gradient effect.
• Experiment with acrylic paints or airbrush colors to achieve unique and detailed effects. By choosing among these options, it is possible to achieve surprising and personalized results in coloring epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85