Facilitating epoxy resin casting on rectangular molds

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Facilitating epoxy resin casting on rectangular molds

To facilitate epoxy resin casting on rectangular molds, it is advisable to follow some key steps:

1. Prepare the mold by cleaning it thoroughly and ensuring it is completely dry.
2. Use a specific primer for resins on silicone molds to promote resin adhesion.
3. Pour the resin slowly into the mold, avoiding the formation of air bubbles.
4. Level the resin with a stick or spatula to achieve a uniform surface.
5. Cover the mold with a lid or cloche to protect it from dust during the curing process.
6. Follow the resin's drying and curing times carefully before removing the piece from the mold. By following these guidelines, optimal epoxy resin casting results can be achieved on rectangular molds.

Techniques for making rectangular molds in resin

Techniques for making rectangular molds in resin can vary depending on the type of resin used and the desired outcome. Here are some general steps to follow for successfully creating rectangular molds in resin:

1. Preparation: Make sure to have a well-ventilated environment and wear the necessary protective clothing.
2. Resin selection: Choose a resin suitable for your project (epoxy, polyurethane, etc.).
3. Molding: Pour the resin into your rectangular mold, being careful to eliminate any air bubbles.
4. Catalyzation: Respect the resin's catalysis times and allow it to dry completely.
5. Release: Once hardened, carefully remove the resin from the mold. These are just basic guidelines, always make sure to follow the specific instructions of the chosen resin manufacturer.

How to achieve smooth surfaces with epoxy resin

To achieve smooth surfaces with epoxy resin, it is essential to follow some key steps:

1. Preparation: Make sure the surface is clean, dry, and free from dust or grease.
2. Application: Pour the epoxy resin onto the surface evenly, avoiding build-ups and air bubbles.
3. Leveling: Use a brush or a spatula to distribute the resin evenly and to eliminate any irregularities.
4. Drying: Let the resin dry for the time indicated on the product, avoiding movements or touching the surface.
5. Sanding: If necessary, you can sand the surface with fine sandpaper to make it even smoother and glossier. By carefully following these steps, you will achieve smooth and high-quality surfaces with epoxy resin.

Tips for perfect results on rectangular molds

To achieve perfect results on rectangular molds, follow these practical tips:

1. Cleaning: Make sure the molds are clean and dry before use.
2. Leveling: Carefully level the mixture in the mold to avoid irregularities on the surface of the finished product.
3. Air bubble removal: To eliminate trapped air bubbles, use a specific tool or lightly vibrate the mold.
4. Curing: Respect the recommended curing times for the resin or silicone used.
5. Demolding: Follow the demolding instructions carefully to avoid damaging the finished product. By following these tips, you can achieve perfect results on your rectangular molds.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85