Improving controlled resin casts

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving controlled resin casts

To improve controlled resin casts, it is advisable to follow some precautions:

• Use high-quality resins, perfectly dosed to ensure the right fluidity and strength.
• Make sure that the casting surface is clean, dry, and properly prepared to promote resin adhesion.
• Use quality silicones to create any molds or containers for the casting.
• Pay attention to temperature and environmental humidity during the casting process to avoid defects.
• Carefully follow the manufacturer's instructions for resin preparation and application.
• Pre-test the mixture and working conditions to achieve optimal results.

Techniques to improve epoxy resin castings

To enhance epoxy resin castings, several techniques can be adopted to ensure optimal results. Here are some useful tips:

• Use high-quality resins to ensure strength and durability.
• Ensure that surfaces are clean and free from moisture to promote resin adhesion.
• Thoroughly mix the resin with the catalyst following the recommended proportions.
• Avoid drafts during the casting process to prevent the formation of air bubbles.
• Use appropriate molds and levelers to achieve a uniform surface.
• Consider applying a protective coating to increase the strength and gloss of the casting.
• Carefully follow the manufacturer's instructions to achieve the best possible results.

Tips for achieving perfect resin pours

To achieve perfect resin pours, it is important to follow some practical tips:

1. Preparation: make sure you have all the necessary tools and materials at hand.
2. Measurement: accurately respect the proportions between resin and hardener to avoid polymerization issues.
3. Mixing: slowly mix the resin and hardener to prevent the formation of air bubbles.
4. Degassing: if necessary, use a vacuum chamber to remove air bubbles from the mixture.
5. Pouring: pour the resin slowly and accurately into your mold or surface, avoiding sudden movements.
6. Leveling: ensure the resin is evenly distributed and leveled on the surface.
7. Protection: cover the pour with a lid to protect it from dust and any contamination during curing. By carefully following these tips, you can achieve flawless resin pours.

Optimizing the Execution of Epoxy Castings

To optimize the execution of epoxy castings, it is essential to follow some specific guidelines:

1. Surface Preparation: Ensure that the surface on which the resin will be poured is clean, dry, and free of dust or grease.
2. Precise Measurement: Use accurate dosages of resin and hardener to avoid issues of incomplete or excessive hardening.
3. Thorough Mixing: Mix the resin and hardener for the correct amount of time and in the right way, avoiding air bubbles and ensuring uniform catalysis.
4. Room Temperature: Work in an environment with a suitable temperature to ensure proper catalysis and hardening of the resin. By following these instructions, you can achieve a high-quality epoxy casting with optimal performance.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85