Improving pours on flat molds

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving pours on flat molds

To improve pours on flat molds, it is advisable to use low viscosity epoxy resins to facilitate penetration into the details of the support. Make sure to carefully prepare the surface of the mold by removing any residues from previous pours and cleaning thoroughly with specific solvents. Additionally, you can consider using release agents to facilitate the extraction of the piece once solidified. For greater precision, you can add additives such as fluid silicones to improve the resin's flowability and reduce the formation of air bubbles. Lastly, carefully monitor the curing times and mixing ratios to achieve optimal results.

Casting Techniques on Flat Molds

Casting techniques on flat molds are essential in the field of epoxy resins and silicone. To achieve optimal results, it is important to follow some key steps:

1. Mold preparation: clean and level the mold to ensure a smooth surface.
2. Measurement and mixing: accurately measure the resin or silicone and thoroughly mix them to avoid air bubbles.
3. Casting: gently pour the material into the mold, avoiding sudden movements that could create imperfections.
4. Leveling and drying: ensure the material is evenly distributed in the mold and let it dry completely before demolding. By following these techniques, high-quality results can be achieved in creating DIY coatings and artifacts on flat molds.

Improving the finish of epoxy resins on flat molds

To enhance the finish of epoxy resins on flat molds, it is advisable to follow some specific steps:

• Use high-quality resins with formulations designed to achieve smooth surfaces.
• Apply a thin layer of release agent to facilitate the removal of the resin from the mold.
• Ensure that the mold is clean and free of previous residues that could compromise the finish.
• Use appropriate pressure and temperature techniques during the casting process to reduce surface imperfections.
• After solidification, carry out meticulous sanding to eliminate any defects and achieve a uniform and glossy finish.

Tips for achieving perfect results with flat molds

To achieve perfect results with flat molds, follow these practical tips:

1. Cleaning: Make sure the mold is clean and free of residue from old epoxy resins or silicone.
2. Leveling: Verify that the mold is perfectly leveled before pouring the material.
3. Mixing: Follow the resin or silicone mixing instructions carefully to avoid air bubbles.
4. Pouring: Pour the material slowly and carefully into the mold, avoiding the formation of air bubbles.
5. Drying: Respect the recommended drying times to ensure optimal material solidification. By following these steps, you can achieve perfect results with your flat molds effectively and precisely.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85