Improving pour control

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving pour control

To improve pour control during the pouring process of epoxy resins or silicones, it is advisable to follow some practices:

1. Use a container with a spout or an applicator for precise pouring.
2. Thoroughly mix the resin or silicone to ensure a uniform consistency.
3. Keep the container at an appropriate height relative to the surface to regulate the pouring speed.
4. Constantly monitor the material's viscosity to prevent unwanted leaks.
5. Use molds or containers with edges to contain the pour and facilitate flow control. By following these guidelines, it will be possible to achieve more precise and uniform results during the pouring process of the materials.

Techniques to improve pour control

Improving pour control during the application of epoxy resins or silicone is essential to achieve optimal results in DIY coatings. Here are some useful techniques:

• Use precise measuring tools to correctly dose the material.
• Ensure that the ambient and material temperature is suitable to avoid viscosity issues.
• Thoroughly mix the product to ensure a uniform distribution of additives.
• Apply the pour evenly, avoiding build-ups or voids.
• Pay attention to the speed and pressure during application to prevent drips or leaks. By following these techniques, it will be possible to enhance pour control and achieve high-quality results in coatings with epoxy resins or silicones.

Tips for better casting management

For better casting management, it is essential to follow some important practices:

1. Make sure to thoroughly prepare the surface on which the casting will be carried out by removing dirt, grease, and old coatings.
2. Use high-quality resins suitable for the specific needs of the project, ensuring resistance and durability over time.
3. Properly measure the resin components following the manufacturer's instructions to avoid hardening or adhesion issues.
4. Thoroughly mix the resin to ensure an even distribution of the components and prevent the formation of air bubbles.
5. Apply the resin carefully and precisely, avoiding excesses or deficiencies that could compromise the quality of the casting. By following these tips, you can achieve a high-quality and durable casting.

Strategies for optimal casting control

To ensure optimal casting control, it is essential to follow some effective strategies:

1. Preparation: Make sure you have all the necessary tools and materials on hand before starting the casting process.
2. Precise measurement: Use accurate measuring tools to correctly dose epoxy resins or silicone.
3. Thorough mixing: Mix the components thoroughly to ensure a homogeneous mixture without lumps.
4. Ambient temperature: Work in an environment with the optimal temperature for casting to avoid shrinkage or excessive catalyzation.
5. Leveling: Ensure proper leveling of the casting surface to achieve a uniform result free of imperfections. By following these strategies, you can achieve optimal casting control and obtain high-quality results in the field of coatings and DIY.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85