Improving the technical control of castings

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the technical control of castings

To enhance the technical control of castings, it is essential to follow some key steps:

1. Use specific high-quality resins for the desired type of casting.
2. Employ suitable silicones to create precise and durable molds.
3. Thoroughly check the temperature and humidity of the working environment.
4. Ensure correct dosing of resin and catalyst.
5. Monitor the curing and hardening times to ensure complete solidification.
6. Conduct resistance and durability tests on the finished castings to assess their quality. By carefully following these recommendations, it will be possible to achieve technically precise and high-quality castings.

Control Techniques for Resin Casting

Control techniques for resin casting are essential to achieve optimal results in the processing process. Here are some useful tips to ensure the quality of the final product:

• Carefully check the proportions of the resin and the hardener to avoid errors in polymerization.
• Ensure that the mixing container is clean and free of moisture to prevent contamination.
• Use precise measuring tools to correctly dose the materials.
• Mix the resin and hardener uniformly to avoid the formation of air bubbles.
• Monitor the room temperature and humidity to ensure proper resin curing.
• Check for any defects or imperfections during the casting process to intervene promptly. By following these control techniques, excellent results can be achieved in resin castings.

Optimizing the technical control of resin casts

To optimize the technical control of resin casts, it is essential to follow some key steps:

1. Use high-quality resins suitable for the purpose.
2. Carefully check the resin-to-catalyst ratios to avoid defects.
3. Ensure that tools and containers are clean and free from contaminants.
4. Maintain a constant temperature during the casting process.
5. Thoroughly check the mixture to avoid air bubbles or lumps.
6. Use quality molds and ensure they are well leveled.
7. Follow the manufacturer's instructions and pay attention to curing times. By following these guidelines, it is possible to ensure effective technical control and achieve high-quality resin casts.

Tips for resin casting control

Controlling resin castings is essential to achieve optimal results in DIY projects. Here are some useful tips for managing this process effectively:

• Make sure to work in a well-ventilated and clean environment to avoid resin contaminations.
• Use accurate measuring tools to correctly dose the resin and the catalyst.
• Carefully mix the two components for at least 2-3 minutes, avoiding the introduction of too many air bubbles.
• Monitor the ambient temperature and the resin itself to prevent polymerization issues.
• Check the resin's consistency during casting and promptly correct any irregularities.
• Lastly, allow the resin to dry in a dust-free and draft-free area to prevent defects in the final finish.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85