Improving the compactness of the resin-coated artifact

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the compactness of the resin-coated artifact

To enhance the compactness of the resin-coated artifact, it is advisable to follow some important steps:

• Use high-quality epoxy resins, capable of ensuring greater strength and compactness to the artifact.
• Apply a uniform layer of resin, avoiding accumulations and air bubbles that could compromise the compactness of the final product.
• Use appropriate catalysts and hardeners to ensure complete polymerization of the resin, thus enhancing its compactness and durability over time.
• Carefully follow the manufacturer's instructions for the correct mixing and application of the resin, essential for achieving a compact and high-quality resin-coated artifact.

How to Achieve a Smooth Surface with Epoxy Resin

To achieve a smooth surface with epoxy resin, follow these steps:

1. Surface Preparation: Ensure it is clean, dry, and free from dust or grease.
2. Mix the epoxy resin and hardener according to the manufacturer's instructions.
3. Apply the mixture to the surface with a brush or spatula evenly.
4. Remove air bubbles with a gas torch or a low-speed mixer.
5. Let the resin dry for the recommended time.
6. If necessary, apply a second coat after the initial curing phase.
7. Finally, sand the surface with fine sandpaper and polish it with a specific epoxy resin polish. By following these steps, you will achieve a smooth and uniform surface with epoxy resin.

Techniques to increase the strength of epoxy resin

To enhance the strength of epoxy resin, it is possible to adopt some effective techniques:

• Ensure the correct dosing of the resin components to achieve the best chemical reaction.
• Add fillers or reinforcing agents such as fiberglass or carbon fibers to increase mechanical strength.
• Apply proper surface treatment before applying the resin to ensure better adhesion.
• Use epoxy resins with specific additives to improve resistance to weather or chemicals.
• Strictly follow the polymerization and curing instructions to ensure maximum structural strength.
• Consider the use of protective coatings or clear varnishes to enhance long-term durability.

Tips to enhance the durability of resin-coated artifacts

To improve the durability of resin-coated artifacts, you can adopt some effective strategies:

• Use high-quality resins, specific to the desired application.
• Ensure proper surface preparation before applying the resin, by removing dirt, grease, or moisture.
• Apply a protective layer of transparent varnish or UV-resistant finish to prevent deterioration caused by sunlight.
• Avoid prolonged exposure to extreme temperatures, which could compromise the stability of the resin over time.
• Carefully follow the manufacturer's instructions during the resin curing and polymerization process to ensure proper catalysis and increased long-term resistance.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85