Improving resin flow in molds

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving resin flow in molds

To enhance the flow of resin in molds, it is crucial to follow some key steps:

1. Mold preparation: Ensure that the mold is clean and completely dry to prevent moisture retention that could compromise resin adhesion.
2. Use of release agents: Applying release agents to the mold can facilitate the uniform spread of resin and prevent unwanted adhesions.
3. Controlling resin viscosity: Adjusting the resin viscosity can promote better distribution within the mold, avoiding air bubbles or irregular accumulations.
4. Use of appropriate mixing systems: Make sure to use proper mixing equipment to ensure a well-homogenized resin before injection into the mold. By carefully following these tips, it will be possible to achieve optimal results in resin flow within molds.

Resin Casting Techniques

Resin casting techniques are essential to achieve quality results. Among the main methods used are brushing, dipping, and spraying. Brushing allows for the direct and controlled application of resin onto the mold in a uniform manner. Dipping, on the other hand, involves immersing the mold in resin for a set time to create a homogeneous layer. Lastly, spraying enables the even distribution of resin using specific tools. Each technique has its advantages and can be chosen based on the specific needs of the project.

Optimizing resin flow in molds

To optimize the flow of resin in molds, it is essential to follow specific techniques. First of all, make sure that the mold is designed with rounded angles to facilitate proper filling. Use resins with suitable viscosity and consider adding flow agents if necessary. Additionally, preheating the resin is advisable to improve fluidity and reduce air bubbles. Monitor injection pressure and speed to avoid air traps and ensure uniform filling. Lastly, consider the use of hot runner injection systems for optimal resin distribution in the mold.

Tips for Epoxy Resin Casting

Epoxy resin casting is a process that requires precision and attention to detail. Here are some useful tips to achieve optimal results:

• Make sure the mold is clean and free of any residue from previous resin castings.
• Use resins suitable for casting, with low viscosity for even distribution.
• Thoroughly mix the resin before use to prevent air bubbles.
• Pour the resin slowly into the mold to prevent bubble formation.
• Use a brush to spread the resin evenly and reach all corners of the mold.
• Cover the mold with a lid or transparent sheet to prevent dust during the curing process. By following these simple tricks, you can achieve professional results in casting epoxy resin in your molds.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85