Improving the final flatness of the artifact

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the final flatness of the artifact

To improve the final flatness of an artifact, it is advisable to follow some key steps:

1. Use specific self-leveling resins, designed to ensure a smooth and uniform surface.
2. Apply a thin layer of silicone to reduce irregularities and enhance the final finish.
3. Consider the use of special coatings, such as primers or glossy finishes, to achieve an even smoother surface.
4. Pay attention to the correct preparation of the surface, removing any imperfections or residues that could compromise flatness. By following these tips and using the appropriate materials, it will be possible to obtain an artifact with an optimal final flatness.

Leveling an epoxy resin surface is a fundamental step to achieve a uniform and high-quality final result. Here is how to proceed correctly:

• Make sure the epoxy resin is completely cured before starting the leveling process.
• Use fine-grit sandpaper to sand the surface evenly and eliminate any irregularities.
• Constantly check the flatness of the treated area to avoid excessive abrasion.
• Carefully remove any residual dust with a damp cloth.
• If necessary, repeat the sanding process until the desired surface is achieved. By following these steps carefully, you can perfectly level the epoxy resin surface.

How to Achieve a Smooth Epoxy Resin Surface

To achieve a smooth surface with epoxy resin, follow these steps:

1. Prepare the surface: Make sure it is clean, dry, and free of dust or grease.
2. Mix the resin: Follow the manufacturer's instructions carefully for proper mixing.
3. Apply the resin: Pour the resin evenly onto the surface and level it with a notched trowel.
4. Remove air bubbles: Use a gas torch to eliminate air bubbles trapped in the resin.
5. Let it dry: Respect the recommended drying times to ensure a perfectly smooth surface. By following these steps, you will obtain a smooth and even surface with epoxy resin.

**Resin Artifacts Sanding Techniques**

Sanding resin artifacts is a fundamental process to achieve a smooth and uniform surface. Here are some recommended techniques for sanding resin artifacts:

• Use fine-grit sandpaper to remove any imperfections and level the surface.
• Gradually switch to finer grits to achieve a smoother surface.
• Use orbital sanders or belt sanders for large-scale projects.
• Apply even pressure during sanding to avoid burrs or depressions on the surface.
• Finally, polish the sanded surface with specific resin products to achieve a brilliant and professional result.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85