Improving the casting performance on rigid bases

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the casting performance on rigid bases

To enhance the casting performance on rigid bases, it is advisable to follow some key steps:

• Thoroughly prepare the surface, ensuring it is clean, dry, and free from dust or grease.
• Use high-quality epoxy resins capable of ensuring good adhesion and resistance.
• Optionally add specific additives to the resin to improve the fluidity and workability of the compound.
• Carefully monitor the temperature and humidity of the environment during casting to avoid issues with uneven curing.
• Follow the manufacturer's instructions closely for both the preparation and application of the resin. By following these recommendations, it will be possible to achieve a better casting performance on rigid bases.

How to Achieve a Glossy Finish on Epoxy Resin

To achieve a glossy finish on epoxy resin, it is essential to follow some precise steps:

1. Sanding: Start by sanding the surface of the resin with fine-grit sandpaper to remove any imperfections.
2. Cleaning: Remove dust and residues from the resin using a clean cloth and a mild detergent.
3. Apply the coating: Apply a thin layer of glossy transparent coating on the resin. You can use clear varnish or a specific resin gloss enhancer.
4. Drying: Allow the coating to dry completely following the manufacturer's instructions.
5. Polishing: Finally, polish the surface with a soft cloth to achieve a shiny and glossy finish. By carefully following these steps, you can achieve a perfect glossy finish on your epoxy resin.

Tips to Prevent Air Bubbles in Epoxy Resin

To prevent the formation of air bubbles in epoxy resin, it is important to follow some specific techniques:

• Mix the resin and hardeners slowly to avoid the incorporation of air.
• Use a tall and narrow container to reduce bubble formation during mixing.
• Use a low-speed stirrer to prevent excessive agitation.
• Remove air bubbles with a gas torch or a surface deoxidizer for metal surfaces.
• Use a vacuum chamber to eliminate bubbles before the curing process.
• Avoid overloading the support with too much resin. By carefully following these techniques, it is possible to achieve bubble-free results in epoxy resin.

Improving epoxy adhesion on rigid surfaces

To enhance the adhesion of epoxy on rigid surfaces, it is advisable to follow some specific steps:

1. Surface preparation: Ensure that the surface is clean, dry, and free from grease, dust, or other impurities.
2. Primer application: Use a specific primer to enhance the adhesion of the epoxy on the rigid surface.
3. Sanding or smoothing: Lightly roughen the rigid surface with fine sandpaper to promote the bonding of the epoxy.
4. Adhesion test: Perform a preliminary test on a small area to verify the effectiveness of the adhesion before applying it to the entire surface. By carefully following these steps, optimal adhesion of epoxy on rigid surfaces can be achieved.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85