Improving the performance of NatureResin on flat surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the performance of NatureResin on flat surfaces

To enhance the performance of natural resin on flat surfaces such as wood, plexiglass, or metal, follow these tips:

• Ensure that the surface is clean and free from dust, grease, or residues.
• Use a specific resin primer or a multipurpose primer to enhance adhesion.
• Carefully level the resin on the surface to avoid air bubbles or irregularities.
• Use a spatula to evenly distribute the resin.
• Cover the surface with an anti-scratch agent to protect the coating.
• Allow the resin to dry in a dust-free and dry environment to achieve a perfect and glossy finish.

Tips for achieving a glossy finish with NatureResin

To achieve a glossy finish with NatureResin, a high-quality epoxy resin, it is important to follow some specific techniques:

1. Surface preparation: Ensure that the surface is clean, smooth, and free from dust and grease.
2. Uniform application: Pour the NatureResin resin on the surface and spread it evenly with a brush or roller to avoid streaks.
3. Air bubble removal: Use a gas torch to eliminate any air bubbles present in the resin.
4. Drying time: Respect the recommended drying times to ensure complete resin catalysis and achieve a glossy and transparent finish. By carefully following these techniques, you can achieve a flawless glossy finish with NatureResin.

How to Avoid Air Bubbles in Epoxy Resin on Flat Surfaces

To prevent air bubbles in epoxy resin on flat surfaces, carefully follow these steps:

1. Make sure to work in a well-ventilated area at room temperature.
2. Thoroughly mix the resin and hardener following the manufacturer's instructions.
3. Apply a thin layer of resin to the surface and let it self-level for a few minutes.
4. Use a gas torch or a brush to eliminate any air bubbles present.
5. Cover the surface with a protective agent to prevent dust or debris.
6. Allow the resin to dry in a draft-free area for the recommended time. By following these tips, you can achieve a smooth surface free of air bubbles in the epoxy resin.

Improving the transparent effect of epoxy resin on smooth surfaces

To enhance the transparent effect of epoxy resin on smooth surfaces, it is advisable to follow some steps:

1. Thorough cleaning: make sure the surface is perfectly clean and free from dust, dirt, or grease.
2. Sanding: use fine sandpaper to lightly sand the surface and ensure optimal adhesion of the resin.
3. Application in thin layers: spread the resin in thin layers, avoiding build-ups and air bubbles.
4. Use of a heat gun: pass a heat gun over the applied resin to eliminate air bubbles and achieve a uniform and transparent surface. By carefully following these tips, you can achieve a flawless transparent effect on the surface treated with resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85