Improving resin performance on panels

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving resin performance on panels

To enhance the performance of resin on panels, it is crucial to follow some key steps:

1. Surface preparation: Ensure that the panels are clean, dry, and free from dust or grease.
2. Uniform application: Spread the resin evenly on the panel's surface, avoiding build-ups or thin areas.
3. Primer application: Apply a specific resin primer on the panel before pouring the resin to ensure optimal adhesion.
4. Leveling: Use a brush or spatula to level the resin on the surface, eliminating any air bubbles. By carefully following these steps, you will achieve a better resin performance on the panels, ensuring a professional and long-lasting final result.

How to achieve a glossy finish on epoxy resin

To achieve a glossy finish on epoxy resin, it is important to follow some key steps:

1. Sand the surface of the resin with fine-grit sandpaper to remove any imperfections.
2. Thoroughly clean the resin to remove any dust or dirt residues.
3. Use a specific transparent primer for resins to ensure adhesion of the glossy coating.
4. Apply the glossy coating on the resin with a brush or roller in thin and uniform layers.
5. Let it dry completely according to the manufacturer's instructions.
6. If necessary, repeat the application of the coating to achieve a perfect glossy finish. By carefully following these steps, it is possible to achieve a professional glossy finish on epoxy resin.

Techniques to prevent bubbles in epoxy resin

To prevent bubbles in epoxy resin, it is essential to follow some specific techniques. Here's what you can do:

• Use a clean and moisture-free environment to work with the resin.
• Mix the resin slowly to avoid air incorporation.
• Use a torch or heat gun to eliminate surface bubbles.
• Use a low viscosity resin to reduce bubble formation.
• Avoid over-agitating the resin to prevent air introduction.
• Use a vacuum to remove smaller bubbles before casting. By following these techniques, it will be possible to achieve bubble-free epoxy resin works with a flawless finish.

Improving resin resistance on panels

To enhance the resistance of the resin on panels, it is advisable to follow some specific practices:

• Ensure that the panel surface is clean and free of grease or dust residues before applying the resin.
• Use high-quality resins with adequate weathering and wear resistance properties.
• Add specific additives to the resin to enhance its resistance, such as anti-UV or anti-scratch agents.
• Apply a transparent protective layer or a silicone coating after the resin has polymerized for additional protection.
• Carefully follow the manufacturer's instructions for resin application and maintenance to ensure maximum long-term resistance.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85