Improving the final finish of epoxy resin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving the final finish of epoxy resin

To enhance the final finish of epoxy resin, it is crucial to follow specific guidelines. Firstly, make sure to thoroughly prepare the surface where the resin will be poured, by removing any dust or grease residues. Use high-quality resins and suitable pigments to achieve intense and vibrant colors. Ensure to adhere to the curing times and mixing ratios recommended by the manufacturer. Moreover, working in a well-ventilated environment and at the right temperature is advisable to prevent air bubbles or imperfections in the resin. Lastly, if needed, you can sand and polish the surface to achieve a flawless finish.

Techniques for achieving glossy finishes with epoxy resin

To achieve glossy finishes with resin, it is important to follow some specific techniques. Here are some useful tips:

• Make sure to prepare the surface where the resin will be applied carefully, sanding and cleaning it to ensure optimal adhesion.
• Use high-quality transparent epoxy resins, ideal for achieving a glossy and crystalline finish.
• Apply the resin in thin and uniform layers, avoiding build-ups and air bubbles.
• After application, cover the work to protect it from dust and weather agents that could compromise the glossiness of the finish.
• Finally, if necessary, perform a final polishing to achieve an impeccable result. By following these techniques, you can achieve glossy finishes with high-quality resin.

Tips for removing air bubbles in epoxy resin

To eliminate air bubbles in epoxy resin, follow these practical tips:

1. Thorough mixing: Make sure to mix the resin and hardener slowly and evenly to prevent the entry of air bubbles.
2. Vacuum chamber: Use a vacuum chamber to remove air bubbles from the mixture before pouring it into the mold or onto the object.
3. Heating: Slightly heat the resin before use to make it more fluid and facilitate the escape of bubbles.
4. Entry points: Use a needle to puncture the surface air bubbles or to bring them to the surface. By following these tips, you can achieve better results free from air bubbles in resin processing.

How to Prevent Streaks in Epoxy Resin

Streaks in Epoxy resin can be avoided by following some precautions during the processing. Here are some helpful tips:

• Make sure to thoroughly mix the Epoxy resin with the hardener for the recommended time, avoiding the incorporation of air into the mixture.
• Apply the Epoxy resin in thin layers to avoid build-ups and air bubbles that can cause streaks.
• Use a high-quality brush to spread the resin evenly and smoothly.
• Avoid overlapping the various layers of resin too much to prevent surface irregularities.
• Work in a clean and well-ventilated environment to reduce the presence of dust or other particles that could create defects in the resin. By following these suggestions, it is possible to achieve smooth surfaces free of streaks when working with Epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85