Improving resin processing on wide molds

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Improving resin processing on wide molds

To enhance resin processing on wide molds, it is advisable to follow some fundamental steps:

1. Ensure that the mold is clean and free from any residues of previous resin.
2. Apply a thin layer of a release agent specifically designed for resins on the mold to facilitate the piece extraction.
3. Use resins with extended working times to allow for a uniform distribution and to prevent air bubbles.
4. Consider the use of retardant additives to control the polymerization process.
5. Verify the correct pressure and temperature during the casting process to prevent deformations or irregularities. By following these guidelines, it is possible to achieve high-quality resin processing on wide molds.

How to Achieve Perfect Finishes

To achieve perfect finishes, it is essential to carefully follow some steps. Firstly, prepare the surface you will be working on by removing any residues and leveling out any imperfections. Choose the most suitable epoxy resin or coating for the material being treated. Apply the product evenly, avoiding excess and air bubbles. Allow it to dry or cure completely following the manufacturer's recommended times. Finally, if necessary, carry out sanding operations to obtain a smooth and uniform surface. Always remember to follow the specific instructions of the product used to ensure optimal results.

Tips for resin prints

Resin prints are a common process in the field of 3D printing. Here are some useful tips to achieve optimal results:

• Make sure to use high-quality resin suitable for your project.
• Calibrate the 3D printer correctly to ensure printing precision and quality.
• Use adequate supports to avoid deformations during the printing process.
• During the post-processing phase, thoroughly wash the printed model to remove any resin residues.
• Harden the printed resin by exposing it to UV light to ensure its solidity.
• Finally, if needed, you can apply protective coatings to enhance the durability and aesthetic appearance of the resin print.

Polishing and Sanding Techniques

Polishing and sanding are two fundamental techniques for achieving smooth and glossy surfaces. While sanding is used to remove imperfections and make the surface uniform, polishing provides shine and refinement. Here are some common techniques used:

• Sanding: different grades of sandpaper or sanding machines are used to remove scratches and irregularities.
• Polishing: abrasive discs with polishing compounds are used to achieve a shiny and smooth surface.
• Manual techniques: these are employed for smaller or irregular surfaces, such as using abrasive sponges or polishing cloths. These practices are widely employed in the DIY sector and for coatings to achieve professional results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85