Preventing defects during the leveling phase

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Preventing defects during the leveling phase

To prevent defects during the leveling phase, it is essential to follow some precautions:

• Ensure that the surface is clean and free from dust, dirt, or residues from previous works.
• Use high-quality self-leveling resins, compatible with the type of flooring and environmental conditions.
• Carefully check the manufacturer's instructions and adhere to the processing and drying times.
• Level the surface carefully, avoiding build-ups and irregularities.
• Constantly check the leveling with a spirit level or specific tools.
• In case of doubts or difficulties, it is advisable to consult a professional in the field.

How to achieve smooth surfaces with epoxy resin

To obtain smooth surfaces with epoxy resin, it is essential to follow some crucial steps:

1. Surface preparation: Make sure the surface is clean, dry, and free from dust or grease.
2. Accurate mixing: Mix the epoxy resin with the hardener following the manufacturer's instructions.
3. Uniform application: Spread the resin evenly on the surface with a brush or a spatula.
4. Air bubble removal: Use a gas torch or a brush to eliminate any air bubbles present.
5. Leveling: Ensure the resin is distributed evenly to achieve a smooth surface.
6. Drying time: Allow the resin to cure for the time recommended by the manufacturer. By carefully following these steps, it is possible to achieve smooth and high-quality surfaces with epoxy resin.

Tips to avoid bubbles during leveling

To avoid bubbles during leveling, follow these practical tips:

• Make sure the surface you are working on is clean and free from dust, dirt, or residues.
• Use a high-quality leveling tool and ensure it is clean and in good condition.
• Pour the resin or silicone slowly and evenly onto the leveling surface.
• Use a brush or roller to spread the material evenly on the surface.
• Work with slow and steady movements to prevent the formation of air bubbles.
• Use a thin brush to remove any bubbles on the surface. By carefully following these tips, you can achieve a perfect leveling without the formation of annoying air bubbles.

Techniques for perfect leveling with epoxy resin

Perfect leveling with epoxy resin is a fundamental process to achieve smooth and uniform surfaces. Here are some techniques to follow for impeccable results:

• Surface preparation: make sure it is clean, dry, and free of dust or residues.
• Multi-stage leveling: apply the resin in thin layers, leveling it with a notched trowel or a serrated spatula.
• Use of a bristled roller: pass a bristled roller over the still fresh resin to eliminate any air bubbles.
• Self-leveling time: allow the resin to self-level for a uniform result.
• Imperfection check: constantly monitor the leveling and correct any imperfections before the resin hardens.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85