Preventing defects in the final finish

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Preventing defects in the final finish

To prevent defects in the final finish of a resin coating job, it is essential to follow some best practices. First and foremost, it is important to thoroughly prepare the work surface, ensuring it is clean, dry, and free of dust and grease. Additionally, it is advisable to apply a specific primer layer to enhance the adhesion of the resin to the substrate. During the resin application phase, it is crucial to meticulously follow the manufacturer's instructions regarding temperature, working time, and mixing ratios. Finally, it is recommended to protect the environment from dust and dirt during the resin curing process.

Techniques to Avoid Bubbles in Epoxy Resin

To prevent bubbles in epoxy resin during the processing, it is crucial to follow specific techniques. Here are some helpful tips:

• Make sure to thoroughly mix the resin and the hardener following the proportions indicated by the manufacturer.
• Use an environment with a constant temperature and avoid air drafts.
• Preheat the resin and molds to reduce bubble formation.
• Work slowly and carefully to avoid introducing air during mixing and pouring.
• Use a brush to eliminate any surface bubbles.
• If necessary, use an ultrasonic device to remove smaller bubbles. By following these techniques, it is possible to achieve optimal results in epoxy resin processing.

How to achieve smooth surfaces with epoxy resin

To obtain smooth surfaces with epoxy resin, it is essential to carefully follow some steps. First of all, make sure to properly prepare the surface by removing any imperfections and cleaning it thoroughly. Apply the epoxy resin following the manufacturer's instructions, thoroughly mixing the two components to obtain a homogeneous blend. Pour the resin onto the surface and level it with a spatula to eliminate air bubbles. Allow the resin to dry in a dust-free and dry environment. Finally, if necessary, gently sand the surface to make it even smoother. Always remember to work in a well-ventilated area and wear appropriate protective gear when handling epoxy resin.

Tips to avoid stains in resin projects

To prevent stains in resin projects, it is essential to follow some practical tips:

1. Cleaning: Ensure that the surface you are working on is clean and free from dust, dirt, or grease residues.
2. Mixing: Carefully follow the manufacturer's instructions for the accurate mixing of the resin and the hardener.
3. Application: Pour the resin slowly and evenly, avoiding build-ups and drips.
4. Protection: Cover the work area with a protective sheet and wear gloves and protective goggles to avoid direct contact with the resin.
5. Drying: Let the resin dry in a clean and well-ventilated environment, avoiding drafts that could cause imperfections. By following these simple tips, you will be able to carry out resin projects without worrying about annoying stains.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85