Reducing invisible air problems

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Reducing invisible air problems

To reduce issues related to invisible air, it is possible to use vapor-permeable coatings or transparent epoxy resins. These materials can seal surfaces, preventing mold and moisture formation. Additionally, the use of anti-condensation silicones can help improve indoor air quality. It is also important to ensure proper ventilation of spaces to promote air circulation and prevent moisture buildup. Lastly, the DIY approach recommends the use of specific air cleaning products, such as air purifiers or dehumidifiers, to maintain a healthy environment free from invisible pollutants.

Remedies to Eliminate Air Bubbles in Epoxy Resin

Air bubbles in epoxy resin can compromise the quality of the finished work. Here are some useful remedies to eliminate them:

• Use a specific casting resin with low viscosity and good self-leveling properties.
• Mix the resin carefully, avoiding the introduction of air during the mixing process.
• Use a vacuum degassing chamber to remove air bubbles before pouring.
• Slightly heat the resin to reduce its viscosity and promote bubble release.
• Use a thin-tipped tool to break surface bubbles during the curing process. By following these tips, it is possible to achieve bubble-free epoxy resin works.

How to Prevent Air Bubbles in Epoxy Resin

To prevent the formation of air bubbles in epoxy resin, it's important to carefully follow some steps during the processing. Here are some useful tips:

• Make sure to thoroughly mix the resin and the hardener following the manufacturer's instructions.
• Avoid mixing too quickly to prevent introducing air into the mixture.
• Use a container with high walls to minimize splashes during mixing.
• Let the mixture rest for a few minutes after stirring to allow air bubbles to rise to the surface and disappear.
• Use a torch to eliminate any remaining air bubbles in the poured resin. By carefully following these suggestions, it will be possible to achieve bubble-free epoxy resin works.

Techniques for a flawless finish with epoxy resin

To achieve a flawless finish with epoxy resin, follow some specific techniques:

1. Prepare the surface carefully, ensuring it is clean, dry, and free from dust or grease.
2. Mix the epoxy resin accurately and following the manufacturer's instructions to avoid air bubbles.
3. Apply a thin layer of epoxy resin and level it with a brush or spatula to prevent build-ups and irregularities.
4. Use a gas torch to remove any surface air bubbles.
5. Cover the work with a lid or dome to protect it from dust during the curing process.
6. Finally, inspect the surface carefully for any imperfections and, if necessary, lightly sand and apply an additional layer of resin for a flawless finish.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85