Free shipping on orders over £29.85
Shipping Tracking!
Google
Facebook
Support Preparation Before Installation: Key Features to Consider
Before proceeding with the installation of any material, it is crucial that the support on which it will be applied is adequately prepared. The characteristics the support must have before installation depend on the type of material to be used, but there are some common aspects to consider:
- Cleaning: The support must be free from dust, dirt, residues of old coatings, or any other contamination that could compromise the adhesion of the new material.
- Dryness: The support must be dry as moisture can negatively affect adhesion and material performance. Ensure there are no water leaks or moisture present in the support.
- Leveling: The support must be leveled and free from irregularities that could compromise material installation. In the presence of significant level differences, leveling the support with self-leveling mortar or other suitable materials may be necessary.
- Strength: The support must be sufficiently strong to support the installed material. For example, in the case of floors, it is essential to verify that the support is robust enough to withstand the expected traffic load.
Following the manufacturer's recommendations for the material to be installed is crucial, as there may be specific additional requirements based on the type of coating or surface being worked on. Proper support preparation is essential to ensure a correct and long-lasting installation of the chosen material.
Support Requirements Before Floor Installation
Before proceeding with floor installation, it is essential to ensure that the support meets specific requirements. Here are the key considerations:
- Cleaning: The support must be clean, free from dust, dirt, oil, grease, and other substances that could compromise floor adhesion.
- Leveling: The support must be leveled to avoid level differences that could cause issues during floor installation.
- Dryness: The support must be completely dry to prevent moisture accumulation that could damage the floor over time.
- Strength: The support must be strong enough to bear the weight of the floor and withstand mechanical stresses.
- Stability: The support must be stable, without movements that could cause cracks or damage to the floor over time.
Ensuring that the support meets all these requirements allows for a correct and durable floor installation.
How to Prepare the Support Before Installation
Before installing resins, silicones, or coatings, it is fundamental to adequately prepare the support to ensure a correct and long-lasting application. Here are some steps to effectively prepare the support:
- Support Cleaning: Ensure the surface is clean from dust, dirt, grease, or residues of old coatings. Use specific detergents and, if needed, degreasers to remove any contaminants.
- Sanding: For smooth or glossy surfaces, lightly sanding with fine sandpaper or an abrasive disc can promote adhesion of the new material.
- Repairing Imperfections: Check for cracks, holes, or irregularities on the surface. Repair any imperfections with specific fillers or epoxy resins to ensure a uniform support.
- Primer or Adhesion Promoters: In some cases, applying a primer or adhesion promoter may be necessary to enhance compatibility between the support and the material to be installed. Follow the manufacturer's instructions carefully.
- Drying Time: After performing the above steps, ensure to respect the recommended drying times before proceeding with the installation of the chosen material. This will ensure better adhesion and optimal performance over time.
Essential Treatments for Support Before Installation
Before installing support such as walls or floors, it is crucial to adequately prepare it to ensure correct adhesion and long-term durability of the applied material. Here are some recommended treatments to follow:
- Cleaning: Remove any dust, dirt, grease, or other impurities that could compromise the adhesion of the coating material. Use specific detergents and ensure the surface is perfectly clean and dry.
- Leveling: Verify that the support is uniform and free from level differences, cracks, or holes. If necessary, level the surface with self-leveling mortar or wall putty to ensure a solid and uniform base for the coating.
- Primer: Apply a specific primer for the type of support to enhance the adhesion of the subsequent material. The primer helps seal the surface and create a stronger bond between the support and the coating.
- Sealing: For porous supports like wood or drywall, applying a sealant is advisable to prevent the coating material's moisture from being absorbed into the support, compromising its stability over time.
By carefully following these steps and using appropriate products and tools, optimal support preparation before material installation is ensured, guaranteeing quality and long-lasting results.
ResinPro: one supplier for all your needs
15 years of experience at your complete disposal, supplying resins and accessories for creativity, industry, DIY, flooring and marine applications.
At your home, directly from the manufacturer!
ResinPro is the direct manufacturer of our resin range for companies and hobbyists, guaranteeing the lowest prices on the market.
Learn more
The widest range of resins in the UK!
We offer resins for every need, from artistic creations to marine and construction applications, far beyond the “limited” selection typically found in local DIY stores.
Expert technical support!
Our technicians provide free remote consulting to help you avoid mistakes and ensure you achieve the result you want — unlike “generic retailers” who sell 1,000 different products.
get a free consultationRESIN PRO is a leader in resin production and distribution!
24-hour delivery: We ship across the UK on the same day. Enjoy convenient home delivery with our appointment service—our courier will contact you in advance and deliver the package to your preferred location, or leave it at an alternative address of your choice.
Full support!
We provide continuous support from preparation to final application, including remote technical assistance, ensuring a smooth experience.
Talk with a specialist and place a phone order without registration and without credit cards!
