How to apply two-component polyester resin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Surface Preparation Before starting the application of the two-component polyester resin, it is essential to carefully prepare the surfaces where it will be poured. Clean and degrease the area, remove any residues of old paints or materials that could compromise the adhesion of the resin. It is advisable to lightly sand the surface to ensure better adhesion. In the case of particularly porous or absorbent surfaces, it is recommended to apply a specific primer to improve the adhesion of the resin. At RESINPRO, you can find a wide range of primers and products for surface preparation.

Mixing the Components of Polyester Resin Once the surfaces are prepared, it's time to mix the two components of the two-component polyester resin. Follow the manufacturer's instructions carefully to ensure the correct dosage and mixing of the two components. Use a clean container and mix thoroughly until a homogeneous mixture is obtained. At RESINPRO, you will find all the materials necessary for the correct mixing and application of the two-component polyester resin.

Application of Polyester Resin Once the mixture is prepared, it's time to pour the resin on the prepared surfaces. Use a brush, roller, or spatula to evenly distribute the resin on the surface. Work quickly to prevent the resin from starting to harden before completing the application. At RESINPRO, you will find a wide range of tools and accessories to facilitate the application of the two-component polyester resin.

Finishing and Care of the Work After applying the resin, it is important to check for trapped air bubbles. In case of bubbles, they can be eliminated with the help of a brush or spatula. Let the resin cure for the time recommended by the manufacturer and proceed with the finishing if necessary. At RESINPRO, you will find specific products for the finishing and care of your two-component polyester resin works.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85