“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

gt1 Cleaning and Protection of the Electronic Circuit<

> Before proceeding with the epoxy resin coating of the electronic circuit, it is essential to ensure that it is perfectly clean and free from residues that could compromise the adhesion of the resin. Use <a hrefquothttpswwwresinproitproductalcool-isopropilico-puroquot stylequotcolor inherit cursor default text-decoration nonequotgtisopropyl alcohol and an antistatic brush to thoroughly clean the board. Subsequently, protect sensitive parts with insulating tape or silicone to prevent the resin from damaging critical components. h1gt2 Application of the <a hrefquothttpswwwresinproitproductcrystal-resina-epossidica-cristallina-trasparente-nuova-formulaquot stylequotcolor inherit cursor default text-decoration nonequotgtEpoxy Crystal Resin Once the circuit is prepared, you can proceed with the application of the <a hrefquothttpswwwresinproitproductcrystal-resina-epossidica-cristallina-trasparente-nuova-formulaquot stylequotcolor inherit cursor default text-decoration nonequotgtepoxy resin. Use a high-quality resin like those available on RESINPRO to ensure optimal results. Pour the resin evenly on the circuit board, making sure to cover all components completely. You can use a brush or syringe to distribute the resin in hard-to-reach areas. h1gt3 Curing and Finishing the Circuith1gt After applying the resin, allow it to cure for the recommended time by the manufacturer. Once the resin is fully solidified, carefully remove the insulating tape and proceed with the finishing of the circuit. Trim any excess resin with a cutter and gently sand the surface to make it smooth and uniform. h1gt4 Final Considerationsh1gt Resin coating electronic circuits is a delicate process that requires precision and attention to detail. With the right materials like those available on RESINPRO, you can achieve professional and long-lasting results. Always remember to follow the manufacturer's instructions and work in a well-ventilated environment to avoid inhaling harmful fumes.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85