Free shipping on orders over £29.85
Shipping Tracking!
Google
Facebook
Applying Microcement on Old Plaster
Microcement can adhere to old plaster as long as it is in good condition and free from significant cracks or detachments. Here are some key points to consider:
- Surface Preparation: Before applying microcement, it is crucial to properly prepare the existing plaster. This may include thorough cleaning, removal of any traces of grease or mold, and repairing imperfections.
- Primer: To enhance microcement adhesion, it is advisable to apply a specific primer for plasters before proceeding with the decorative coating.
- Anchor Coat: In some cases, applying a first layer of adhesive microcement or anchor coat may be necessary to ensure better material adhesion to the existing surface.
- Microcement Application: Once the preparatory stages are complete, you can proceed with applying microcement following the manufacturer's instructions. It is important to carefully follow the guidelines for optimal results.
- Finishing and Protection: After applying microcement, it is recommended to protect the surface with a sealant or a protective coating to ensure its durability over time and facilitate cleaning.
In conclusion, microcement can be successfully used on old plaster, but it is essential to follow the correct preparation and application procedures to achieve an aesthetic and long-lasting result.
Applying Microcement on Already Plastered Surfaces
Microcement can be applied on already plastered surfaces. This versatile decorative coating is suitable for renewing both floors and walls. Here are some considerations:
- Surface Preparation: Before applying microcement, it is crucial to properly prepare the plastered surface. This preparation process includes thorough cleaning, removal of any imperfections, and creating a smooth and uniform base.
- Primer and Base Coat: To ensure optimal adhesion of microcement to the plastered surface, it is advisable to apply a specific primer. Subsequently, a first layer of microcement, called "base coat," is applied.
- Microcement Application: After preparing the surface and applying the primer and base coat, proceed with the actual microcement application. This material is spread in thin layers with the help of spatulas until the desired thickness is achieved.
- Finishing and Sealing: Once the microcement application is complete, proceed with the finishing and sealing phase. This step is important to protect the coating and make it resistant to wear, water, and stains.
In conclusion, applying microcement on already plastered surfaces is possible as long as the preparation is accurate, and the application process is followed correctly.
Procedure for Applying Microcement on Old Plaster
To apply microcement on old plaster, carefully follow these steps:
- Surface Preparation: Ensure the plaster is clean, dry, free of dust, and oily substances. Repair any cracks or irregularities if needed.
- Primer: Apply a specific microcement primer on the surface to improve material adhesion.
- Microcement Base: Spread a base layer of microcement with a thickness of about 2-3 mm using a steel trowel. Allow it to dry as per the manufacturer's instructions.
- First Microcement Layer: Once the base layer is dry, apply a second microcement layer with a thickness of about 3-4 mm. Level it with a steel trowel.
- Fiberglass Mesh Reinforcement: If necessary, place a fiberglass mesh between the first and second layers to increase mechanical resistance.
- Second Microcement Layer: Apply another layer of microcement with a thickness of about 2-3 mm. Level and compact the material well.
- Finishing and Sealing: Once the second layer is dry, proceed with the desired finish (smooth, rough, colored, etc.) and apply a protective microcement sealer for durability.
By following these steps correctly, you can achieve excellent results when applying microcement on old plaster.
Considerations for Applying Microcement on Non-Recent Plasters
When applying microcement on non-recent plasters, certain considerations should be followed to ensure optimal and long-lasting results. Here are some points to keep in mind:
- Cleaning and Preparation: Thoroughly clean the existing plaster to remove dirt, dust, grease, or old coatings. Ensure the surface is smooth, dry, and free of cracks or irregularities.
- Primer: Apply a specific microcement primer on the prepared plaster. This layer will help increase microcement adhesion and prevent delamination issues in the future.
- Leveling: If the plaster has unevenness or imperfections, it is advisable to level the surface with a self-leveling compound before applying microcement.
- Microcement Application: Carefully follow the manufacturer's instructions to prepare and apply the microcement. Make sure to respect the drying times between each layer.
- Sealing and Finishing: After completing the microcement application, seal the surface with a specific sealant to protect the coating and extend its durability over time. You can then proceed with the desired finish, such as glossy or matte.
By following these considerations and working carefully, you can achieve an excellent result when applying microcement on non-recent plasters.
ResinPro: one supplier for all your needs
15 years of experience at your complete disposal, supplying resins and accessories for creativity, industry, DIY, flooring and marine applications.
At your home, directly from the manufacturer!
ResinPro is the direct manufacturer of our resin range for companies and hobbyists, guaranteeing the lowest prices on the market.
Learn more
The widest range of resins in the UK!
We offer resins for every need, from artistic creations to marine and construction applications, far beyond the “limited” selection typically found in local DIY stores.
Expert technical support!
Our technicians provide free remote consulting to help you avoid mistakes and ensure you achieve the result you want — unlike “generic retailers” who sell 1,000 different products.
get a free consultationRESIN PRO is a leader in resin production and distribution!
24-hour delivery: We ship across the UK on the same day. Enjoy convenient home delivery with our appointment service—our courier will contact you in advance and deliver the package to your preferred location, or leave it at an alternative address of your choice.
Full support!
We provide continuous support from preparation to final application, including remote technical assistance, ensuring a smooth experience.
Talk with a specialist and place a phone order without registration and without credit cards!
