The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces.
+ gloves & detailed instruction for FREE.
£33.85
The best choice for deep pouring:
✔️ Low exothermic reaction –> Castings up to 5cm [1,96”]
✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years
✔️ Highly mechanical resistant surface, for maximum scratchproof properties
✔️ Low viscosity –> Bubbles free
✔️ Long working time –> No rush in the process
✔️ Heat resistance –> Up to 70°C [158 F]
✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015
🌿 Cruelty Free, Vegan Friendly🐹
£16.85
✔️ Perfect transparency -> A true liquid crystal
✔️ High scratch resistance -> Ideal for tables!
✔️ UV filter for protection against yellowing -> 10 years warranty.
✔️ Heat Resistance (Up to 70°C)
✔️ Easy to use -> 2:1 mixing ratio
✔️ Odourless
✔️ 1,5сm layer per application
🌿 Cruelty Free, Vegan Friendly🐹
£11.65
Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>
£19.85
Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.
£13.45
“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form
Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.
£22.85
Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.
£22.45
EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.
£17.85
Can Microcement be Applied on Inclined Surfaces?
Microcement can indeed be applied on inclined surfaces, as long as certain precautions and specific techniques are followed. Microcement is a highly versatile decorative coating composed of a mixture of cement, resins, and additives that make it durable and suitable for various surfaces. Here are some key points to keep in mind:
Surface Preparation: Ensure that the surface is clean, smooth, dry, and free from dust, grease, or other impurities. It may be necessary to apply a primer to improve the adhesion of the microcement.Base Layer: On inclined surfaces, it is advisable to apply a suitable primer and spread an adequate base layer to ensure a uniform and flawless surface. This will help enhance the adhesion of the microcement.Microcement Application: Once the base is prepared, you can proceed with the application of the microcement following the manufacturer's instructions. It is important to work precisely and evenly, especially on non-horizontal surfaces.Finishing and Sealing: After applying the microcement and allowing it to dry properly, it is essential to proceed with finishing and sealing to protect the coating from wear, stains, and moisture. Always remember to carefully follow the manufacturer's instructions and, if necessary, seek assistance from an experienced professional for a proper and long-lasting application.Can Microcement be Used on Curved Surfaces?
Microcement can be applied on curved surfaces, but certain factors need to be considered to achieve optimal results. Here's what to consider:
Material Flexibility: Microcement is a coating composed of resins and mineral powders that give the material a certain flexibility. This characteristic allows microcement to adapt to curved surfaces without creating cracks or breakages.Surface Preparation: Before applying microcement on a curved surface, ensure that it is clean, smooth, and free of any imperfections. Proper surface preparation is essential to ensure optimal adhesion of the microcement.Professional Application: Since applying microcement on a curved surface can be more challenging, it may be advisable to rely on an experienced professional for this type of work. Correct application is essential to avoid future issues.Sealing and Maintenance: After applying microcement on a curved surface, proper sealing is important to ensure its durability over time. Additionally, follow the manufacturer's recommendations for the correct maintenance of the coating. By following these guidelines, you can achieve an aesthetically pleasing and durable result on curved surfaces.How to Apply Microcement on Non-Flat Surfaces
To apply microcement on non-flat surfaces, it is necessary to carefully follow some steps to achieve optimal results. Microcement is a highly versatile and durable decorative coating, but it requires proper surface preparation and precise technique to be applied on irregular surfaces. Here's how to proceed:
Surface Preparation:- Thoroughly clean the surface to be treated, removing dust, dirt, and grease.
- Repair any cracks, holes, or irregularities with suitable fillers or mortars.
- Apply a specific primer for microcement to ensure adhesion.
Microcement Application:- Spread a thin layer of microcement with a stainless steel trowel, working in limited sections.
- Use a notched trowel to spread the material evenly, even on non-flat surfaces.
- Apply multiple layers of microcement, allowing drying between each application, following the manufacturer's instructions.
Finishing and Protection:- Gently sand the surface with fine sandpaper to achieve a smooth and uniform result.
- Apply a sealant or protective varnish to ensure the durability and resistance of the coating.
By carefully following these steps, you can successfully apply microcement even on non-flat surfaces, achieving an aesthetically pleasing and durable result over time. Limitations of Applying Microcement on Vertical or Inclined Surfaces
Applying microcement on vertical or inclined surfaces may present some limitations to consider:
- Adhesion: Vertical or inclined surfaces require excellent adhesion to avoid material detachment over time. Properly preparing the surface to ensure cleanliness, absorption, and roughness is essential to promote microcement adhesion.
- Thickness: Vertical or inclined surfaces require a reduced thickness of microcement compared to horizontal surfaces to prevent material sagging or flowing during application and drying. Excessive thickness could compromise the stability of the coating.
- Working Time: Applying microcement on vertical or inclined surfaces may require more time and attention than on horizontal surfaces due to the need for precise work to avoid drips and excessive material buildup.
- Profiles and Angles: Vertical or inclined surfaces have profiles and angles that can complicate the application of microcement. It is important to use specific tools and techniques to achieve a uniform and defect-free result.
- Drying: After application, microcement must dry properly. On vertical or inclined surfaces, particular attention to ventilation and ambient temperature may be necessary to ensure uniform and complete drying. Considering these limitations during the planning and execution of microcement application on vertical or inclined surfaces will help achieve quality and long-lasting results.
Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.
£13.45
“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form
Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.
£22.85
Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.
£22.45
EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.
£17.85
ResinPro: one supplier for all your needs
15 years of experience at your complete disposal, supplying resins and accessories for creativity, industry, DIY, flooring and marine applications.
At your home, directly from the manufacturer!
ResinPro is the direct manufacturer of our resin range for companies and hobbyists, guaranteeing the lowest prices on the market.
Learn moreThe widest range of resins in the UK!
We offer resins for every need, from artistic creations to marine and construction applications, far beyond the “limited” selection typically found in local DIY stores.
Expert technical support!
Our technicians provide free remote consulting to help you avoid mistakes and ensure you achieve the result you want — unlike “generic retailers” who sell 1,000 different products.
get a free consultationRESIN PRO is a leader in resin production and distribution!
24-hour delivery: We ship across the UK on the same day. Enjoy convenient home delivery with our appointment service—our courier will contact you in advance and deliver the package to your preferred location, or leave it at an alternative address of your choice.
Full support!
We provide continuous support from preparation to final application, including remote technical assistance, ensuring a smooth experience.
Talk with a specialist and place a phone order without registration and without credit cards!
Free shipping on orders over £29.85
Shipping Tracking!
Google
Facebook
