Encapsulation Resin for Circuits

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Encapsulation Resin for Circuits

The use of resin for encapsulating electronic circuits is a common practice to protect components from moisture, dust, and external agents. Epoxy or polyurethane resins are poured onto the circuits, creating a protective coating that enhances reliability and extends the lifespan of devices. This process, known as "potting," also provides electrical and thermal insulation, reducing the risk of short circuits and damage caused by extreme temperatures. Circuit encapsulation resins are available in different formulations to suit specific protection and insulation needs.

Epoxy resin for printed circuits

Epoxy resins for printed circuits are insulating materials used in the production of electronic boards. These resins, based on epoxy resins, ensure excellent adhesion and protection against moisture and chemical agents. Thanks to their high thermal resistance, epoxy resins ensure stable performance even in extreme conditions. Furthermore, the low electrical conductivity of these materials helps prevent short circuits and interferences. Epoxy resins for printed circuits are widely used in the electronics industry to ensure reliability and durability of electronic devices.

How to create encapsulations with epoxy resin

Encapsulations with epoxy resin are made by following some fundamental steps:

1. Preparation: ensure that the surface is clean and dry.
2. Measurement: accurately measure the resin and hardener according to the manufacturer's instructions.
3. Mixing: combine the resin and hardener and mix thoroughly for at least 2-3 minutes.
4. Pouring: pour the resin into the molds or directly onto the object to be encapsulated.
5. Removing air bubbles: use a tool to eliminate any trapped air bubbles.
6. Curing: let it dry for the time indicated by the manufacturer.
7. Finishing: once hardened, check for uniformity and defects. By carefully following these steps, you can create encapsulations with epoxy resin effectively and professionally.

Transparent epoxy resin for electronic circuits

Transparent epoxy resin for electronic circuits is an insulating and protective material used to coat and safeguard printed circuits and electronic components. Thanks to its transparency, this resin allows for the visualization of the underlying components without compromising their functionality. Its high thermal and chemical resistance makes it ideal for protecting circuits from moisture, dust, and external agents. Additionally, transparent epoxy resin offers excellent adhesion to common materials used in electronics. With its insulating properties, epoxy resin helps prevent short circuits and damage to electronic circuits.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85