Resin shower tray cracks

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Resin shower tray cracks

Cracks in a resin shower tray can be caused by various factors, such as structural movements, extreme temperatures, or incorrect installation. To repair the cracks, you can follow these steps:

1. Thoroughly clean the damaged area.
2. Use a transparent epoxy resin to fill the cracks evenly.
3. Carefully level the surface and let it dry completely.
4. Apply a gel coat or protective coating to restore the original finish.
5. Regularly check the condition of the shower tray to prevent future damage. By following these instructions, it is possible to effectively repair cracks in a resin shower tray.

Repairing cracks in resin shower tray

Cracks in the resin shower tray can be effectively and durably repaired by following some steps. Here's what to do:

• Thoroughly clean the damaged area, removing dirt and residues.
• Gently sand the cracks to make them uniform and promote the adhesion of the resin.
• Apply a specific primer for resins to the entire repair area.
• Spread the colored epoxy resin over the crack, leveling it with a spatula.
• Allow it to dry for the time indicated by the manufacturer.
• Lightly sand the surface to make it smooth.
• Apply a transparent gel coat to restore shine and protection. By carefully following these steps, it is possible to repair cracks in the resin shower tray effectively.

Resin shower tray grouting

Grouting a resin shower tray is a fundamental operation to ensure a flawless final result. Here's how to grout a resin shower tray:

1. Thoroughly clean the shower tray to remove dirt and residues.
2. Prepare the resin grout following the manufacturer's instructions.
3. Apply the grout to any cracks or imperfections on the shower tray.
4. Level the grout with a spatula and remove the excess.
5. Allow to dry completely following the recommended drying times.
6. Once dry, gently sand to achieve a smooth surface.
7. Finally, clean thoroughly to remove any grout residues. By following these steps, you will successfully grout your resin shower tray.

Resin shower tray maintenance

Maintaining a resin shower tray is essential to ensure its durability and functionality over time. Here are some guidelines to follow:

• Regular cleaning with neutral detergents to prevent damage to the surface.
• Avoid using abrasive products that could scratch the resin.
• Remove any stains with warm water and mild soap.
• To prevent limescale buildup, dry the shower tray after use.
• Regularly check the condition of the tray for any signs of wear or damage that need prompt repair. By following these simple guidelines, you can keep your resin shower tray in excellent condition over time.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85