Resin brush cleaner

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Resin brush cleaner

The brush cleaner for resin processing is a specific solvent designed to clean and maintain in optimal conditions the brushes used with epoxy or polyurethane resins. This product is essential to effectively remove resin residues from the brushes, prolonging their lifespan and maintaining their functionality over time. Make sure to use a solvent specifically formulated for resins, as generic solvents may not be effective or could be harmful to the brushes. It is advisable to clean the brushes immediately after use to prevent the resin from solidifying and compromising the bristles.

Epoxy resin thinner

Epoxy resin thinner is a product used to reduce the viscosity of the resin itself, thus facilitating its workability and application. This type of thinner is designed to be compatible with epoxy resins, ensuring optimal mixability and quality results. It is important to carefully follow the manufacturer's instructions on the amount of thinner to use to achieve the desired consistency without compromising the chemical properties of the resin. Before using epoxy resin thinner, make sure to work in a well-ventilated area and wear the necessary protective equipment.

How to Thin Epoxy Resin

To thin epoxy resin, it is important to carefully follow the manufacturer's instructions to ensure optimal results. Here is a general procedure for thinning epoxy resin:

1. Wear gloves and protect the work area.
2. Pour the desired amount of resin into a clean, graduated container.
3. Slowly add the recommended thinner by the manufacturer, usually acetone or isopropyl alcohol, stirring gently to avoid air bubbles.
4. Continue adding the thinner until the desired consistency is reached.
5. Wait for the recommended time to allow air bubbles to dissolve.
6. Use the thinned resin within the specified working time. Always remember to consult the manufacturer's instructions and test the dilution ratios on small quantities before using on larger projects.

Epoxy resin thinners

Epoxy resin thinners are substances used to reduce the viscosity of the resin and facilitate its application and workability. These thinners can be used to adjust the working time and consistency of the epoxy mixture. They are usually composed of specific solvents that evaporate during the resin curing process. Before using an epoxy resin thinner, it is important to carefully follow the manufacturer's instructions to ensure proper mixing and achieve the desired properties of the final coating. It is advisable to always test the product on a small area before applying it on a large scale.

Epoxy resin thinner for DIY projects

The epoxy resin thinner for DIY projects is a product used to reduce the viscosity of epoxy resin, making it easier to work with and improving its ability to penetrate porous materials. This thinner is particularly useful for adjusting the working time of the resin and achieving more uniform and transparent finishes. It is important to carefully follow the manufacturer's instructions on the quantity to use and the mixing ratio with the epoxy resin. Before application, make sure to work in a well-ventilated area and wear the necessary protective equipment.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85