Monocomponent epoxy resin thinner for use

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Monocomponent epoxy resin thinner for use

The monocomponent epoxy resin thinner is a product used to reduce the viscosity of the resin and facilitate its application and workability. This type of thinner is specifically designed for monocomponent epoxy resins, ensuring effective mixing without compromising the chemical and mechanical properties of the material. Before use, it is important to carefully follow the manufacturer's instructions to achieve the best results and ensure that the thinner is compatible with the resin being used. Generally, monocomponent epoxy resin thinner is primarily used in the DIY and hobby sector for creating coatings, adhesives, and other creative applications.

- Thinner for one-component epoxy resin

Thinner for one-component epoxy resin is a product used to reduce the viscosity of the resin and facilitate its application. This type of thinner is designed to be mixed directly with the one-component epoxy resin, without the need to add other components. Thanks to its solvent power, the thinner helps to achieve a smoother consistency of the resin, making the material easier to apply and work with. It is important to carefully follow the recommended doses by the manufacturer to ensure optimal results and maintain its chemical and mechanical properties.

How to Dilute Single-Component Epoxy Resin

To dilute single-component epoxy resin, it is important to carefully follow the manufacturer's instructions to ensure optimal results. Typically, it is advisable to use a specific solvent such as epoxy thinner. Here is a general procedure you can follow:

1. Pour the desired amount of epoxy resin into a clean and suitable container.
2. Gradually add the epoxy thinner following the proportions recommended by the manufacturer.
3. Thoroughly mix the resin and the thinner with a mixing stick for at least 2-3 minutes.
4. Check the consistency of the mixture: if necessary, add more thinner to achieve the desired viscosity.
5. Use the diluted resin within the specified working time to avoid hardening issues. Always remember to wear appropriate clothing and protective equipment when handling epoxy resin.

Instructions for using epoxy resin thinner

To use the epoxy resin thinner, carefully follow the following instructions:

1. Ensure you are working in a well-ventilated area or outdoors to avoid inhaling harmful vapors.
2. Pour the thinner into a clean, graduated container to accurately measure the necessary amount.
3. Gradually add the thinner to the epoxy resin, stirring constantly to prevent lumps or irregularities in the mixture.
4. Check the proportions recommended by the manufacturer of the epoxy resin to achieve the desired consistency.
5. Use the thinner to adjust the viscosity of the resin and facilitate its application or the removal of air bubbles.
6. Store the thinner in a cool and safe place, away from heat sources or flames. By following these instructions, you can achieve optimal results when using the epoxy resin thinner.

Compatible thinner for one-component epoxy resin

The compatible thinner for one-component epoxy resin is a product designed to reduce the viscosity of the resin and facilitate its application. This type of thinner is specifically formulated to ensure optimal miscibility with one-component epoxy resins, ensuring perfect chemical compatibility and high-level performance. Before using any thinner with epoxy resin, it is essential to verify the compatibility of the product to avoid unwanted reactions or compromising the properties of the final coating. It is advisable to carefully follow the manufacturer's instructions to achieve the best possible results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85