Average cost of epoxy resin casting thinner

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Average cost of epoxy resin casting thinner

The average cost of an epoxy resin casting thinner varies depending on the brand and quantity purchased. Usually, epoxy resin thinners are available in different forms, such as liquid or powder thinners. The price can also vary depending on the concentration of the thinner and its ability to enhance the casting characteristics of the epoxy resin. In general, the average cost of a good epoxy resin casting thinner ranges between X and Y euros per liter, depending on the quality and quantity purchased. It is advisable to compare different options on the market to find the product that best suits your needs.

Epoxy resin thinner for artistic creations

The epoxy resin thinner is a product used to adjust the viscosity of the resin and facilitate the mixing of pigments or colorants. In artistic creations, it allows for a smoother consistency for casting, impregnation, or coatings. It is important to carefully follow the manufacturer's instructions to avoid alterations in the chemical properties of the resin. Before use, it is advisable to perform tests on small quantities to evaluate its effect on the material and the final appearance of the artwork. Make sure to work in a well-ventilated environment and use the necessary personal protective equipment.

How to Use Epoxy Resin Thinner

To use epoxy resin thinner, follow these instructions carefully:

1. Identify the appropriate thinner for your epoxy resin.
2. Add the thinner to the epoxy resin following the recommended ratios.
3. Thoroughly mix the thinner and resin until a homogeneous mixture is obtained.
4. Apply the thinned resin to the desired surface.
5. Allow it to dry according to the recommended drying times.
6. Remember to work in a well-ventilated area and wear proper protective equipment. Remember that correct use of epoxy resin thinner can improve the flow, workability, and finish of your project.

Epoxy resin thinner for DIY jewelry

The epoxy resin thinner is an essential product for creating DIY jewelry. This liquid, often based on specific solvents, is used to reduce the viscosity of epoxy resin, making it easier to mix and apply. Additionally, the thinner helps eliminate air bubbles trapped in the mixture, ensuring a transparent and homogeneous final result. Before using an epoxy resin thinner, it is crucial to carefully follow the manufacturer's instructions and conduct tests on small samples to assess its effectiveness and the effect on the material.

Epoxy resin thinner for resinous painting

Epoxy resin thinner is a product used to reduce the viscosity of the resin and facilitate its application and mixing with pigments or colorants. When it comes to resinous painting, the use of thinner is essential to achieve a smooth and consistent consistency, ideal for evenly spreading the resin on the surface to be coated. It is important to carefully follow the recommended doses to avoid alterations in the characteristics of the resin and ensure a high-quality final result. Before proceeding with the application of thinned resinous paint, make sure you have all the necessary materials available and work in a well-ventilated environment.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85