Epoxy Casting Fast Cure Thinner

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy Casting Fast Cure Thinner

The epoxy casting fast cure thinner is a product used to reduce the viscosity of epoxy resin and facilitate the casting process. This type of thinner is designed to be mixed with high viscosity epoxy resins, allowing for better material flow and reducing working time. It is important to carefully follow the recommended doses and manufacturer's instructions to ensure optimal results. The epoxy casting fast cure thinner is particularly useful in DIY projects and crafts that require quick resin curing. For best results, visit resin-pro.co.uk for high-quality products.

- Epoxy resin thinner for printing

The epoxy resin thinner is a product used to adjust the viscosity of epoxy resin, facilitating the mixing and workability of the material. It is particularly useful in the 3D printing sector with epoxy resin, where the correct consistency of the resin is essential to achieve optimal results. The epoxy resin thinner can also be used to correct any mixing errors or reduce the formation of air bubbles during the printing process. It is important to carefully follow the manufacturer's instructions to ensure safe and effective use of the thinner in the processing of epoxy resins.

How to Dilute Epoxy Resin for Casting

To properly dilute epoxy resin for casting, it is advisable to use a specific solvent such as acetone or isopropyl alcohol. Typically, it is recommended to add the solvent to the epoxy resin in a ratio of 5-10% of the total volume, but it is important to carefully follow the manufacturer's instructions to achieve the desired consistency. Mix slowly and thoroughly to avoid the formation of air bubbles. It is recommended to perform a preliminary test on a small quantity to evaluate the effect of dilution on the resin and hardener. Working in a well-ventilated environment and using personal protective equipment, such as a mask and gloves, is essential when handling diluted epoxy resin.

**Guide to Using Epoxy Resin Thinner**

Epoxy resin thinner is a product used to adjust the viscosity of the resin, facilitate mixing, and enhance penetration into porous materials. Here is a practical guide on the correct use of epoxy resin thinner:

1. Dosage: Add the thinner to the resin following the recommended proportions by the manufacturer to achieve the desired consistency.
2. Mixing: Thoroughly mix the resin and the thinner for at least 2-3 minutes to ensure a homogeneous mixture.
3. Application: Use the compound within the indicated working time and follow the specific instructions for your project.
4. Safety: Make sure to work in a well-ventilated area and follow safety regulations for using thinners. By following these simple guidelines, you can achieve optimal results when using epoxy resin thinner.

Transparent epoxy resin thinner

The transparent epoxy resin thinner is a solvent used to reduce the viscosity of the resin and facilitate its application and mixing. This type of thinner is specifically formulated for transparent epoxy resins, ensuring a uniform mixing without compromising the transparency of the final product. It is important to use the thinner recommended by the resin manufacturer to avoid compatibility issues and ensure optimal results. Before use, it is advisable to carefully read the manufacturer's instructions and follow the necessary precautions for correct handling and application of the thinner and epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85