Epoxy Casting Resin Thinner

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy Casting Resin Thinner

The epoxy casting resin thinner is a product used to reduce the viscosity of the resin and facilitate the casting process. This thinner is designed to be compatible with specific epoxy resins to ensure a uniform mixing and a correct chemical reaction. It is important to carefully follow the manufacturer's instructions to determine the amount of thinner to add, in order to achieve the desired consistency without compromising the resin properties. Before using the epoxy casting resin thinner, make sure to wear the necessary protective clothing and equipment and work in a well-ventilated area.

How to Dilute Epoxy Resin for Casting

To properly dilute epoxy resin for casting, it is important to carefully follow these instructions:

1. Make sure to use a diluent recommended by the manufacturer of the epoxy resin.
2. Pour the desired amount of resin into a clean container and slowly add the diluent.
3. Thoroughly mix the compound for at least 2-3 minutes, making sure to scrape the edges and bottom of the container well.
4. Check the consistency: the diluted resin should be fluid but not too runny.
5. Use the diluted resin within the working time indicated by the manufacturer to avoid polymerization issues. By following these instructions, you can obtain an ideal diluted mixture of epoxy resin for your castings.

Epoxy resin dilution for silicone molds

Diluting epoxy resin for silicone molds is a fundamental process to achieve optimal results. Before pouring the epoxy resin into the silicone mold, it is advisable to dilute it with a specific thinner for epoxy resins. This helps reduce the viscosity of the resin, making it easier to evenly distribute it in the mold and reducing the formation of air bubbles. Generally, it is recommended to dilute the resin following the manufacturer's instructions, which may vary depending on the type of epoxy resin used. Make sure to carefully follow the instructions to achieve impeccable molding results.

Specific thinner for epoxy resin

The specific thinner for epoxy resin is a product designed to reduce the viscosity of the resin and facilitate its application and workability. This type of thinner is formulated not to compromise the chemical characteristics of the epoxy resin, ensuring proper catalysis and adequate adhesion. It is important to use only the thinner recommended by the manufacturer of the epoxy resin to avoid compatibility issues and ensure optimal coating performance. Before use, it is advisable to carefully read the manufacturer's instructions and follow the guidelines for correct dilution and application of the epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85