Professional transparent epoxy resin thinner average cost

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Professional transparent epoxy resin thinner average cost

The average cost of a professional transparent epoxy resin thinner can vary depending on the brand and quantity of the product. Usually, high-quality thinners for transparent epoxy resins have a slightly higher price compared to lower-end ones. However, investing in a quality thinner can ensure better workability and more satisfying final results. Before purchasing, it is advisable to assess your own needs and consult the technical data sheets of the products to ensure compatibility with the epoxy resin being used.

- Transparent Epoxy Resin Thinners

Transparent epoxy resin thinners are used to reduce the viscosity of the resin itself, making mixing and application easier. These products are designed to be compatible with transparent epoxy resins, ensuring a uniform mixing without compromising the final properties of the coating. It is important to carefully follow the manufacturer's recommendations to ensure the correct proportion of thinner to epoxy resin. Typically, transparent epoxy resin thinners are formulated to ensure good adhesion, chemical resistance, and transparency of the final coating.

How to Thin Epoxy Resin

To thin epoxy resin, it is advisable to carefully follow the manufacturer's instructions to ensure optimal results. Typically, a specific thinner for epoxy resins is used, such as ethyl acetate thinner. Here are the general steps to follow to thin epoxy resin correctly:

1. Accurately measure the amount of epoxy resin to be thinned.
2. Pour the desired amount of resin into a clean container.
3. Gradually add the thinner, stirring thoroughly with a mixing stick to avoid the formation of air bubbles.
4. Continue adding the thinner until the desired consistency is reached.
5. Use the thinned resin within the working time indicated by the manufacturer. Always remember to wear protective clothing and work in a well-ventilated area when handling epoxy resins.

Epoxy Resin Solvent

Transparent epoxy resins require the use of a specific solvent for cleaning tools and surfaces during and after application. It is recommended to use solvents such as acetone or isopropyl alcohol to remove any epoxy resin residues. These solvents can effectively dissolve hardened resin without damaging the treated surfaces. It is important to carefully follow the manufacturer's instructions for both the epoxy resin and the solvent, ensuring proper cleaning and maintenance of the material.

Professional epoxy resin dilution

Diluting professional epoxy resin is a common process used to adjust the material viscosity and facilitate its application. To properly dilute epoxy resin, it is essential to carefully follow the manufacturer's instructions and use recommended solvents, such as acetone or isopropyl alcohol. Maintaining a precise ratio between epoxy resin and solvent is important to avoid alterations in the properties of the final material. Before proceeding with the dilution, make sure to work in a well-ventilated area and wear the necessary protective clothing and equipment.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85