Epoxy resin solvent usage

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy resin solvent usage

Epoxy resin solvent is commonly used to thin the resin and facilitate its application. Before using it, make sure to carefully follow the manufacturer's instructions to ensure the correct mixing and application of the epoxy resin. It is important to use the solvent in well-ventilated environments and follow the safety precautions indicated on the packaging. Additionally, it is advisable to test the solvent on a small area to check its compatibility with the epoxy resin and achieve the desired results. Always remember to use the appropriate personal protective equipment when using the solvent.

Epoxy resin solvent

An epoxy resin solvent is a chemical compound used to dissolve and clean surfaces treated with epoxy resin. This type of solvent is essential for removing any resin residues and for cleaning tools and surfaces contaminated during the processing. It is important to choose a specific solvent for epoxy resin as it ensures effective cleaning without damaging the underlying material. Before using any solvent, make sure to carefully follow the manufacturer's instructions and to adopt appropriate safety measures, such as ventilation and the use of personal protective equipment.

How to Thin Epoxy Resin

To thin epoxy resin, you can use a specific solvent such as acetone or isopropyl alcohol. Here are the steps to properly thin epoxy resin:

1. Make sure to work in a well-ventilated area and wear personal protective equipment.
2. Pour the desired amount of resin into a clean and solvent-resistant container.
3. Gradually add the solvent to the resin, stirring thoroughly with a plastic stick or spatula to avoid air bubble formation.
4. Keep adding the solvent until you reach the desired consistency. Remember that over-thinning the resin can compromise its properties.
5. Once you have achieved the desired mixture, use it within the specified working time for epoxy resin. By carefully following these steps, you can effectively thin epoxy resin for your DIY project.

Epoxy resin printing solvent

The epoxy resin printing solvent is a chemical compound used to clean and remove any imperfections from prints made with epoxy resin or photopolymer. This solvent, often based on alcohols or ketones, is able to dissolve traces of residual resin and ensure a smooth and defect-free surface. It is important to use the solvent accurately and follow the manufacturer's instructions to avoid damage to the print. Before using any solvent, make sure you are in a well-ventilated environment and wearing proper personal protective equipment.

Epoxy resin thinner

The epoxy resin thinner is a product used to reduce the viscosity of the resin and facilitate its application. It is a specific solution designed to be mixed with epoxy resins to achieve the desired consistency for various uses, such as painting, laminating, or casting. It is important to carefully follow the manufacturer's instructions to ensure proper dilution and achieve optimal results. Before using the epoxy resin thinner, make sure you have a well-ventilated environment and wear appropriate protective clothing.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85