Universal solvent for clear resins reviews

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Universal solvent for clear resins reviews

The universal solvent for clear resins is widely appreciated for its versatility and effectiveness in the DIY and coatings industry. User reviews of this product are generally positive, as it allows for easy dilution of clear resins without compromising their properties. It is particularly useful for adjusting the viscosity of resins, making mixing and application easier. Additionally, many appreciate its ability to clean tools and surfaces during and after the processing. However, it is always advisable to test the solvent on a small area before use to verify compatibility with the resin in use.

Best solvent for epoxy resins

The best solvent for epoxy resins is acetone. This solvent is particularly effective in removing epoxy resins due to its ability to dissolve them quickly and efficiently. Acetone is widely used for cleaning equipment, tools, and surfaces contaminated with epoxy resins during coating works or DIY projects. It is important to use acetone in well-ventilated areas and follow safety regulations, as it is flammable and can be irritating to the skin and respiratory tract. Before use, it is advisable to perform a compatibility test on a small surface to ensure it is suitable for the material being treated.

How to properly thin epoxy resin

To properly thin epoxy resin, it is important to carefully follow these instructions:

1. Use a thinner recommended by the epoxy resin manufacturer to ensure compatibility.
2. Pour the desired amount of resin into a clean container and gradually add the thinner.
3. Mix thoroughly with a stick for at least 2-3 minutes, ensuring the mixture is homogeneous.
4. Check that the resin consistency is fluid but not too liquid.
5. Wait for the recommended resting time before use to allow air bubbles to dissipate. By following these steps, you can safely and effectively thin epoxy resin for your DIY projects.

Safe Solvents for Epoxy Pigments

Safe solvents for epoxy pigments must be carefully selected to ensure the desired outcome without compromising the quality of the epoxy resin. Some commonly used solvents for epoxy pigments include:

1. Fatty alcohols: such as isopropyl alcohol, which is effective in dispersing pigments without compromising the epoxy's properties.
2. Esters: such as ethyl acetate, known to be a safe and effective solvent for epoxy pigments.
3. Glycols: like propylene glycol, which can be used to dilute pigments without compromising the strength and durability of the epoxy resin. It is crucial to follow the manufacturer's instructions for the epoxy resin and conduct preliminary tests to verify the solvent's compatibility with epoxy pigments.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85