Non-slip treatment for terracotta

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Non-slip treatment for terracotta

The non-slip treatment for terracotta is a process that allows to make terracotta surfaces less slippery, increasing safety in environments such as floors, stairs, and outdoor areas. There are several specific products to treat terracotta and make it non-slip, such as protective coatings or resin-based treatments. These products create a rough surface that enhances grip and reduces the risk of slips. Before applying any non-slip treatment, it is important to thoroughly clean the terracotta and ensure it is completely dry. Moreover, it is advisable to carefully follow the manufacturer's instructions to achieve the best results.

Protective paint for terracotta floors

Protective paint for terracotta floors is a specific product designed to protect and enhance terracotta surfaces. This type of paint forms a resistant layer that helps prevent wear, stains, and moisture damage on terracotta floors, ensuring greater durability over time. Typically, protective paint for terracotta floors is transparent to maintain the natural aesthetic of the material, but there are also colored versions available to customize the look. Prior to application, it is essential to clean and prepare the surface thoroughly to ensure perfect adhesion of the paint and achieve optimal results.

How to make a terracotta floor non-slip

To make a terracotta floor non-slip, you can follow these steps:

1. Cleaning: Make sure the floor is clean and free from wax residues or dirt that could compromise the effectiveness of the non-slip treatment.
2. Non-slip treatment: Apply a specific non-slip product for terracotta floors. These products are usually based on epoxy resins or silicone that create a rough surface to increase grip.
3. Application: Follow the manufacturer's instructions carefully for applying the non-slip treatment. Make sure to distribute it evenly over the entire surface of the floor.
4. Maintenance: Periodically check the status of the non-slip treatment and reapply it if necessary to ensure maximum safety. By following these tips, you can effectively and durably make your terracotta floor non-slip.

Non-slip products for terracotta floors

Non-slip products for terracotta floors are solutions specially designed to improve safety and prevent slipping on terracotta surfaces. These products are formulated with resins and special additives that increase skid resistance without compromising the natural look of terracotta. Usually available in different forms, such as paints or specific treatments, non-slip products for terracotta floors are easy to apply and offer long-lasting protection. Before application, it is advisable to thoroughly clean the surface to ensure optimal adhesion. These products are ideal for those looking to enhance the safety of their spaces without sacrificing the charm and beauty of terracotta flooring.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85