Waterproofing for camper vans

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Waterproofing for camper vans

Waterproofing for camper vans are specific products designed to protect the vehicle structure from water leaks and moisture. Typically, these are liquid coatings based on epoxy resins or silicone that create a waterproof barrier on the surface of the camper van. These products are particularly useful for preventing damage from leaks and mold inside the vehicle, especially in areas most exposed to the elements such as the roof and joints. Prior to application, it is essential to thoroughly clean and prepare the surface to ensure optimal adhesion of the waterproofing. It is recommended to carefully follow the manufacturer's instructions to achieve effective and long-lasting results.

**Guide to Epoxy Resin Application**

The application of epoxy resin is a process that requires precision and attention to achieve optimal results. Here is a practical guide to successfully apply epoxy resin:

1. Surface Preparation:
   • Ensure that the surface is clean, dry, and free from dust and grease.
   • If needed, sand the surface to ensure optimal adhesion of the resin.
2. Mixing the Epoxy Resin:
   • Follow the manufacturer's instructions carefully to mix the epoxy resin and the hardener in the right proportion.
3. Application:
   • Pour the resin onto the surface evenly.
   • Spread the resin with a brush or spatula to completely cover the surface.
4. Removing Air Bubbles:
   • Use a gas torch to eliminate air bubbles that form during the application.
5. Drying:
   • Allow the resin to dry for the time indicated by the manufacturer, avoiding dust and air drafts. By carefully following these steps, you can achieve a professional result in epoxy resin application.

Silicone Mold Tutorial

Silicone molds: here's how to make them with a detailed tutorial. To create DIY silicone molds, you will need epoxy resin, catalyst, colored pigments, and an object to replicate. Follow these steps:

1. Prepare the epoxy resin following the manufacturer's instructions.
2. Add the catalyst and mix well.
3. Pour the resin into the container to create the base of your mold.
4. Place the object to replicate on the resin and let it dry.
5. Once solidified, carefully remove the object.
6. Pour the liquid silicone onto the mold and let it cure.
7. Extract your silicone mold and start creating your reproductions. By following these simple steps, you can create customized silicone molds for your DIY projects.

Epoxy Resin DIY Pigments

Epoxy resin DIY pigments are powdered or liquid colorants used to dye epoxy, polyurethane, or other resins used in craft projects. These pigments allow for customization and the creation of unique shades in resin creations such as jewelry, decorations, and art objects. Precise dosing of the pigments is important to achieve the desired color, and it is essential to thoroughly mix them into the resin before the curing process. It is advisable to follow the manufacturer's instructions and conduct tests to understand the amount of pigment needed to achieve the desired chromatic effect.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85