Pouring epoxy resin on metal elements

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Pouring epoxy resin on metal elements

Pouring epoxy resin on metal elements is a common process to create protective or decorative coatings. Before starting, make sure the metal surface is clean and free of grease or dirt. Apply a primer suitable for the type of metal to promote adhesion of the resin. Next, prepare the resin following the manufacturer's instructions carefully and pour it evenly onto the metal surface. Allow it to dry and cure completely according to the recommended times. This process can be used to protect metals from corrosion, enhance aesthetics, or create waterproof coatings.

Pouring resin on metal

Pouring resin on metal is a common process for creating protective or decorative coatings. Before starting, make sure the metal surface is clean and free from grease or dirt. Apply a specific metal primer to ensure optimal adhesion of the resin. Then, pour the resin and evenly level it on the metal surface. Allow it to dry and harden according to the manufacturer's instructions. The resin will create a transparent layer that will protect the metal from weathering, corrosion, and scratches. This process is ideal for coating DIY objects, furniture, or metal artifacts.

How to Pour Epoxy Resin on Metal

To pour epoxy resin on metal, carefully follow these steps:

1. Surface Preparation: Ensure that the metal is clean, dry, and free of grease or dust. Lightly sanding the surface can improve adhesion.
2. Protection: Use tape or sealant to protect the areas of the metal that should not be covered by the resin.
3. Resin Mixing: Follow the manufacturer's instructions for mixing the resin and hardener. Make sure to mix thoroughly to prevent air bubbles.
4. Pouring: Slowly pour the resin onto the metal surface, being careful not to create air bubbles. You can use a tool to level the resin if necessary.
5. Drying: Allow the resin to cure for the recommended time by the manufacturer, avoiding any movements or vibrations that could compromise the curing process. By following these steps, you can successfully pour resin on metal to create custom coatings or finishes.

Tips for pouring resin on metal

To pour resin on metal, follow these helpful tips:

1. Prepare the metal: make sure the surface is clean, dry, and free from grease or dust.
2. Use epoxy or polyurethane resin to ensure good adhesion to the metal.
3. Thoroughly mix the resin with the hardener following the proportions recommended by the manufacturer.
4. Pour the resin onto the metal slowly to avoid air bubbles and make sure to cover the surface evenly.
5. Allow the resin to dry in a dust-free and dry environment, following the recommended curing times.
6. If necessary, you can sand and polish the cured resin to achieve a perfect result.

**Techniques for Casting Resin on Metal**

Casting resin on metal requires following specific techniques to ensure an optimal result. Here's what to do:

• Prepare the metal: make sure the surface is clean, grease-free, and well-sanded.
• Use epoxy or polyurethane resins for better adhesion to the metal.
• Thoroughly mix the resin following the manufacturer's instructions.
• Pour the resin onto the metal surface evenly.
• Use a wooden stick to eliminate any trapped air bubbles.
• Let the resin dry for the indicated time.
• Optionally, you can sand and polish the surface to achieve a flawless result.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85