Mold release without breakage

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Mold release without breakage

Achieving mold release without breakage is a crucial process in the field of epoxy resins and silicone processing. To prevent damage to the artifact during extraction, it is essential to follow some precautions:

1. Use release agents specific to the type of resin or silicone used.
2. Apply the release agent evenly on the mold surface.
3. Wait for the recommended drying time before proceeding with the extraction.
4. Perform gentle and uniform movements to remove the artifact from the mold.
5. Ensure proper mold maintenance to prevent resin or silicone build-ups that could compromise the breakage-free release.

How to prevent breakages during mold release

To avoid breakages during mold release, it is essential to follow some correct practices. Here are some useful tips:

• Make sure the mold is completely dry before proceeding with the release.
• Apply a mold release agent or a separation solution on the mold to facilitate the release.
• Use appropriate tools and avoid forcing the mold during extraction.
• Be gentle and controlled in releasing the mold to avoid damage to the surface of the artifact.
• Ensure that the material used for the mold is compatible with the resin or silicone material to prevent unwanted adhesions. By carefully following these guidelines, the risk of breakages during mold release can be significantly reduced.

Techniques for Damaged-Free Mold Release

To achieve a mold release without damages, it is crucial to follow specific techniques. Here are some useful tips:

• Use release agents such as epoxy resins or molding silicones to facilitate the separation between the mold and the finished piece.
• Ensure that the mold is completely dry before proceeding with the release.
• Carefully apply the release agent on the entire surface of the mold.
• Wait for the necessary time for the release agent to take effect before proceeding with the separation.
• Use appropriate tools to assist in the release process without damaging either the mold or the finished piece. By following these techniques, it is possible to achieve an effective mold release without compromising the quality of the final product.

Delicate and Safe Mold Release

Delicate and safe mold release is essential to ensure the success of molding works. To achieve optimal results, it is advisable to carefully follow these steps:

• Use release agents specific to the type of epoxy resin used.
• Apply the agent evenly on the mold, making sure to cover all surfaces.
• Wait for the necessary time for the complete hardening of the agent.
• Extract the artifact carefully, avoiding sudden movements that could damage the surface.
• Clean the mold thoroughly after extraction to ensure its durability over time. By following these instructions, it will be possible to achieve delicate and safe mold releases, preserving the quality of the finished product.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85