**Instructions for Mixing Two-Component Resin**

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

**Instructions for Mixing Two-Component Resin**

Mixing the two-component resin is a crucial step to achieve optimal results in coating and DIY projects. Here is how to proceed correctly:

1. Accurately measure the quantities of the two components A and B according to the recommended ratios.
2. Pour component A into a clean container, then add component B.
3. Vigorously mix the two components with a low-speed stirrer for at least 2-3 minutes.
4. Ensure that the mixture is homogeneous, without streaks or lumps.
5. Use the resin within the indicated working time, avoiding waste and ensuring proper polymerization. By carefully following these instructions, you will achieve excellent results with your two-component resin.

Epoxy Resin Mixing Techniques

Mixing epoxy resin is crucial to achieve optimal results in coating and DIY projects. Here are some techniques to follow for precise and homogeneous mixing:

• Use clean and dry containers to avoid contaminations.
• Measure the amounts of epoxy resin and hardener accurately, following the proportions recommended by the manufacturer.
• Slowly mix the two components for at least 2-3 minutes, scraping the sides and bottom of the container well.
• Avoid incorporating air during mixing to prevent the formation of air bubbles in the compound.
• Make sure to respect the working and curing times indicated to ensure the solidity of the coating.

**Proper Mixing Guide for Polyurethane Resin**

Mixing polyurethane resin requires precision and attention to ensure optimal results. Here is a step-by-step guide for proper mixing:

1. Prepare the work area with protective materials.
2. Weigh the resin and the catalyst accurately according to the proportions recommended by the manufacturer.
3. Pour the resin into a clean container and add the catalyst.
4. Slowly stir with a stick for at least 3-5 minutes, being careful not to introduce air bubbles.
5. Pour the mixture into a new container and stir again to ensure even distribution.
6. Apply the resin within the working time indicated by the manufacturer. By carefully following these instructions, you will achieve quality results in working with polyurethane resin.

Mixing Advice for Transparent Resin

To achieve optimal mixing of transparent resin, follow these practical tips:

• Make sure to use clean and moisture-free containers to avoid contamination.
• Measure the resin and hardener accurately following the proportions recommended by the manufacturer.
• Mix gently but thoroughly for at least 2-3 minutes, scraping the sides and the bottom of the container well.
• Avoid incorporating air during mixing to prevent the formation of air bubbles in the final product.
• Allow the mixture to rest for a few minutes before application to allow degassing and achieve a perfectly transparent surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85