Multi-level embedding technique

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Multi-level embedding technique

The multi-level embedding technique is a process mainly used in the field of epoxy resins and coatings. It involves creating a layered protective barrier by applying different resins or silicones successively on a surface. This method ensures enhanced resistance and durability to the treated material, protecting it from weathering, wear, and corrosion. Moreover, multi-level embedding can also be employed in the DIY sector to enhance the quality and performance of various artifacts. It is crucial to carefully follow the manufacturer's instructions and implement the necessary safety measures during the application of this process.

Tutorial: Epoxy Resin Layering Technique

Layering epoxy resin on multiple levels is an advanced technique that allows creating three-dimensional resin layers for artistic or decorative projects. To achieve this technique, it is essential to carefully follow these steps:

1. Prepare the epoxy resin according to the manufacturer's instructions.
2. Pour a thin layer of resin into your mold and let it partially cure.
3. Add the desired decorative elements and pour another layer of fresh resin over them.
4. Repeat this process for each desired level, ensuring partial curing between each layer.
5. Finally, allow the resin to completely dry according to the recommended times. By following these steps accurately, you can achieve beautiful three-dimensional effects with epoxy resin on multiple levels.

Embedding objects in resin in multiple layers

Embedding objects in resin in multiple layers is a common technique in the DIY and crafting sector. To achieve an optimal result, it is essential to follow some key steps:

1. Preparation of objects: make sure the objects are clean, dry, and positioned at the desired point inside the mold.
2. Pouring the resin layer: pour a thin layer of transparent resin into the bottom of the mold and let it partially cure.
3. Placement of objects: arrange the objects on the partially cured resin layer and press lightly to make them adhere.
4. Pouring additional layers: pour additional layers of resin one at a time, letting them partially cure between each layer.
5. Finishing: once all the layers are completed, let the resin cure completely following the manufacturer's instructions and carefully remove the object from the mold. By carefully following these steps, it is possible to create a beautiful resin object with the embedded objects inside.

Steps to create multilevel embedments

To create multilevel embedments, you need to follow some key steps:

1. Surface preparation: Make sure the surface you will be working on is clean, dry, and free from dust and grease.
2. Application of the first resin: Spread a thin layer of epoxy resin on the prepared surface and let it dry completely.
3. Creation of the first embedment layer: Place the objects to embed on the first resin layer and cover them with another layer of resin. Let it dry completely.
4. Repeat the process: Repeat the resin application and the creation of new layers until you reach the desired number of multilevel embedments.
5. Finishing and protection: Once the embedments are complete, apply a protective coating to ensure resistance and durability over time.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85