Microcement can be applied in areas with rising damp.

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Microcement: Application in Damp Environments

Microcement can be applied in environments with rising damp, but taking precautions is essential to ensure an effective and durable application of the material. Here are some key points to consider:

• Surface Preparation: Before applying microcement, it is crucial to ensure that the surface is clean, dry, and free from any traces of moisture and mold. In the presence of rising damp, it may be necessary to treat the walls beforehand with specific products to block moisture.

• Waterproof Barrier: To prevent rising damp from damaging the microcement over time, it is advisable to apply a waterproof barrier before installing the coating. This protective layer will help preserve the integrity of the microcement and prevent any moisture-related issues.

• Installation System Choice: There are different installation systems for microcement, some of which involve using reinforcing meshes to increase strength and durability. In the presence of rising damp, opting for an installation system that provides greater protection against moisture may be advisable.

By following these guidelines and taking the right precautions, microcement can be successfully applied in environments with rising damp, achieving a high-quality and functional aesthetic result.

Microcement: Resistance to Moisture

Microcement is a material that can resist moisture if correctly applied and sealed. Composed mainly of polymer cement, additives, and pigments, when combined, they create a resistant and waterproof coating. Here are some points to consider regarding microcement's moisture resistance:

• Correct Application: Ensuring that microcement is resistant to moisture requires carefully following application instructions. Typically, microcement is applied in thin layers and then sealed with a specific protective coating.

• Sealing: After applying microcement, it is essential to seal it with a specific protective coating. This sealing layer helps increase the resistance of microcement to moisture and liquid penetration.

• Maintenance: To preserve microcement's moisture resistance over time, regular maintenance and cleaning of the coating are advisable. Prompt intervention in case of damage or wear is important to prevent water infiltration.

In conclusion, when applied correctly and adequately maintained, microcement can be an excellent choice for surfaces prone to moisture, such as bathrooms and kitchens. However, consulting a professional for proper and long-lasting installation is always recommended.

Solutions for Applying Microcement in the Presence of Rising Damp

To apply microcement in environments with rising damp, several solutions can be adopted to ensure a lasting and quality result:

• Moisture Treatment: Resolving the issue of rising damp is crucial before applying microcement. This may require professional intervention to treat the walls with specific products that prevent moisture rising.

• Waterproof Barrier: To prevent moisture from damaging microcement over time, applying a waterproof barrier between the substrate and the microcement coating is advisable. This barrier prevents moisture from reaching the microcement surface.

• Specific Primer: Before applying microcement, using a specific primer designed for damp surfaces or those affected by rising damp is recommended. This primer helps improve the adhesion of microcement to the substrate and protects it from moisture.

• Drainage: If possible, improving drainage around the area where microcement is to be applied is advisable. Good drainage can help reduce moisture in the substrate and prevent future problems.

By implementing these solutions, a high-quality microcement surface can be achieved even in the presence of rising damp, ensuring resistance and durability over time.

Microcement Treatment for Environments with Moisture Issues

Microcement is a highly versatile and durable coating that can be used in environments with moisture problems. The treatment for applying microcement in these situations involves specific precautions and steps:

• Surface Preparation: It is essential that the surface where microcement will be applied is clean, dry, and free from excessive moisture and mold. In the presence of moisture, treating the surface beforehand with specific sealants or primers to block moisture is advisable.

• Base Layer Application: Before applying the actual microcement, creating a waterproof base layer to protect the substrate from moisture is recommended. This layer can be made with waterproof epoxy or polyurethane resins.

• Microcement Application: Once the base layer is completely dry, the actual microcement can be applied. This coating will provide resistance to moisture and create a continuous and waterproof surface.

• Sealing and Protection: After applying microcement, it is advisable to seal it with specific products to protect it from moisture and stains. This will help ensure the long-term durability of the coating.

By carefully following these steps and using suitable products, microcement can be an excellent solution for environments with moisture problems, guaranteeing both resistance and aesthetics.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85